GT235 Mower Deck Zerk Replacement

   / GT235 Mower Deck Zerk Replacement #1  

snpower

Gold Member
Joined
Nov 12, 2010
Messages
442
Location
Charlottesville, Virginia
Tractor
John Deere GT235, GT 275, 1025R
I have two, that will not take grease. I tried the "heat" trick, to no avail. Are they simply removed by pulling them out, say with vise grips? I'm not sure where to source new ones... thanks for the assist in advance.
 
   / GT235 Mower Deck Zerk Replacement #2  
Threaded in........ TSC has them.....
 
   / GT235 Mower Deck Zerk Replacement
  • Thread Starter
#4  
Thanks... my impression was that they were the drive-in type, because they aren't backing out when I turn them CCW.
 
   / GT235 Mower Deck Zerk Replacement #6  
You can find the grease fittings on the Deere parts schematic: https://partscatalog.deere.com/jdrc/

If you copy and paste the part number for the fitting into google, you can find a description. The one deck I looked at (there are several models for your tractor) indicated it was a drive in fitting.
 

Tractor & Equipment Auctions

1986 ASPT 30ft S/A Pole Trailer (A51692)
1986 ASPT 30ft S/A...
2014 Chevrolet Cruze LTZ Sedan (A50324)
2014 Chevrolet...
2010 Ford F550 Service Truck (TITLE) (NOT RUNNING) (A50774)
2010 Ford F550...
John Deere L125H Skidloader (RUNS) (A50774)
John Deere L125H...
2012 Hyundai Elantra Sedan (A50324)
2012 Hyundai...
NEW 2024 LOAD TRAIL 83IN X 14FT Tandem Axle Dump Low-pro Trailer (A52748)
NEW 2024 LOAD...
 
Top