Grease Zerks

   / Grease Zerks #1  

MESSMAKER

Veteran Member
Joined
May 19, 2009
Messages
2,231
Location
Bluegrass,KY
Tractor
DK4710SE
I have several that won't take grease. Planning to replace. Anyone know the size?
 
   / Grease Zerks #2  
I'm not sure of the size but I had a couple on my front loader that wouldn't take grease. Turned out to be the holes inside the pins to be plugged up not the grease Zerks. I just removed the pin and it was easy to clean out. I reinstalled it and it's good to go.
 
   / Grease Zerks #3  
loader m8, power steering cylinders 1/4"-28, don't know about the rest.
 
   / Grease Zerks
  • Thread Starter
#4  
Anybody know about the ones on front axle?
 
   / Grease Zerks #5  
If you are talking about the swivel on the front axle they are 1/8"-28 BSPT (British pipe thread)
 
   / Grease Zerks #8  
I've had to replace zerks on my FEL & grapple. I take a working zerk from the opposite side of the FEL or grapple and trot on down to my NAPA dealer. Makes things a whole lot easier. Surprisingly, as I remember, the FEL had some European(??) sized zerks and the grapple was SAE. I got the SAE zerks from NAPA and the European ones from the Kubota dealer.
 
   / Grease Zerks #9  
You could go to Amazon and just buy an assortment package of zerks. You get around 100 of various sizes and configurations in each of the assortments (SAE and Metric). Not terribly expensive, and handy to keep around.
 
   / Grease Zerks #10  
Harbor freight has assortments in metric and sae. About 6-8 bucks for a hundred of each standard.
 

Tractor & Equipment Auctions

2012 SULLIVAN PALATEK AIR COMPRESSOR (A51222)
2012 SULLIVAN...
2014 TROXELL 130BBL VACUUM TRAILER (A50854)
2014 TROXELL...
Lincoln Electric Vantage 300 Welder/Generator (A49461)
Lincoln Electric...
2019 Bobcat E32i Mini Excavator (A50322)
2019 Bobcat E32i...
2015 Timpte Hopper Bottom (A50514)
2015 Timpte Hopper...
2018 Ram 3500 Bucket Truck with Duralift DTS29 - 34FT Walk-In Bucket, HEMI Gas, 98K Miles (A51039)
2018 Ram 3500...
 
Top