Grab handle

[Danny 1953]

New Holland workmaster 40 hp.
Wanting to attach grab handle to help getting on and off.
Any suggestions about handle I can buy? There is a hole in about the right place on loader frame. I looked at a jeep grab handle but looking for better choice.

 

[Williy]

Maybe you can find something here??

https://www.amazon.com/s?k=grab+handles&crid=2C9CZ9DMKU305&sprefix=grab+handles%2Caps%2C156&ref=nb_sb_noss_1

willy

 

[Willman]

I made a OAH (operator assist handle) and bolted to the loader upright
I used to aways grab the upright to get on and off, but its not a good place to grab
The handle is easy to get a good grip and I use it every time getting on and off the tractor

 

[gstrom99]

I made a OAH (operator assist handle) and bolted to the loader upright
I used to aways grab the upright to get on and off, but its not a good place to grab
The handle is easy to get a good grip and I use it every time getting on and off the tractor

Great idea! I always grab my loader frame, and sometimes come back with a greasy finger or two...

 

[dstig1]

Nice "OAH"!

 

[oosik]

When I get on the tractor. A grab handle on the fender and the corner of the FEL, right where Willman - post#3 - has his grab handle attached.

I have a step on my side. So I don't have to go all the way from the ground to the floor of the tractor. Ground - step - floor of tractor.

 

[WranglerX]

I made a OAH (operator assist handle) and bolted to the loader upright
I used to aways grab the upright to get on and off, but its not a good place to grab
The handle is easy to get a good grip and I use it every time getting on and off the tractor

Did something similar with a bit of angle iron and 3/4 inch pipe and abit of welding.... Probably need to fabricate something as you will probably find nothing fits without some fabrication...