Good morning!!!!

   / Good morning!!!! #205,624  
Primeweld customer service is amazing.
I emailed them asking if there was a PDF for the wall chart that came with the MIG 285. They sent me one, but it had both sides on one image. I made it two sided and letter sized so I could laminate it, and sent that PDF back to them. They were so pleased that they asked if I could do the same for some other models. They insisted on sending me a nice pair of MIG gloves, even though I insisted it only took me a few minutes to do them.
Let me know if you would like the pdf, I’ll send it to you if you would like.
welding is one of the things on my bucket list, have never welded.
 
   / Good morning!!!! #205,625  
Guests got here late morning, we made some sandwiches for them. Kathleen made a beautiful dinner for our guests, country style pork ribs with Mac and cheese with baked squash. Everything was very good. Today we are heading to eastern Vermont, Woodstock and Quechee Gorge area, probably not far from Thomas.

Mostly, I need to go back and look at that picture, the only thing sticking up should be a 6 by 6 post for the low railing. Will take another look.

Drove thru Woodstock Aug 12, 2001. Went to church a couple miles before the Quechee Gorge area, up on the hill on the left.
 
Last edited:
   / Good morning!!!! #205,629  
67°f and .14 inches rain with chance of more today.

Guys finally won at H&F last night. A much needed moral boost.

Got update from Canadian friends, damage much worse than expected as it was more extensive than just the house but lots of contents ruined.

Today will be somewhat wx dependent. But a Po run for sure

Prayers for all
Be safe
Have a great day
 
   / Good morning!!!! #205,630  
Paul reminds me, I forgot to get the trash out to the road this week.

Finally a good day to burn the sticks in the fire ring, wet, no wind, no raining yet. Just sitting around camp fire.
IMG_0526.jpeg

Taking more nails out of deck boards, but not all. Too wet to tape the joists when I pull them.
 

Tractor & Equipment Auctions

IMPORTANT PLEASE READ!!!! TERMS AND CONDITIONS (A48836)
IMPORTANT PLEASE...
Tennant S30 Ride-On Sweeper (A49346)
Tennant S30...
2014 UTILITY 53X102 DRY VAN TRAILER (A50046)
2014 UTILITY...
Rhino SR-15M rotary cutter (A47164)
Rhino SR-15M...
2000 John Deere 1860, 30ft Wide, Gandy Box, Wing Fold, 7.5in Spacing (A50397)
2000 John Deere...
2008 Hino 268 Truck, VIN # 5PVNJ8JV582S51513 (A48836)
2008 Hino 268...
 
Top