Popgadget
Elite Member
Two considerations
1. The original fabrication is likely a higher temp oven braze.
2. What do you have to lose?
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 17413815
Two considerations
1. The original fabrication is likely a higher temp oven braze.
2. What do you have to lose?
m7040
Elite Member
- Joined
- Sep 15, 2006
- Messages
- 3,718
- Location
- Frederick maryland
- Tractor
- Kubota M7040, MF 203 industrial, ZD331, RTV 1100 , Kubota Minix excavator, Unimog 404
Popg, was looking for your comments on repairing the leaking pressure washer pump but could not find it. Maybe an overlay with oxy/acc brazing may work after grinding it clean?
Popgadget
Elite Member
That’s pretty ugly! Weld repairs on cast iron can be structurally strong but are rarely liquid or air tight. If you bead blasted it clean and used a decent borax type flux, flowing bronze over the entire area “might” work if the edges all flow to a nice wet edge.
A high silver rod like Harris Safety Silv56 would likely be better. Use the Black high temp “Stay Silv” flux as well.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,111
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Just did the math and YTD with 9 Golden Comet hens… 1139 eggs produced.
That's lot of easy over and scramble eggs.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,111
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
79F steady breeze high humidity with light haze of northern fires.
One kitten convince to have nap,she got fussy when I try to slowly remove her from my arms...guess she wanted more nap time.
Timmer enjoy the long walk
2+ hours bouncing on rider mower it's done for another week.
Plans for the evening little bbqing follow setting on the deck enjoying smooth cigar waiting for critters and stars.
Enjoy your evening all.
One kitten convince to have nap,she got fussy when I try to slowly remove her from my arms...guess she wanted more nap time.
Timmer enjoy the long walk
2+ hours bouncing on rider mower it's done for another week. Plans for the evening little bbqing follow setting on the deck enjoying smooth cigar waiting for critters and stars.
Enjoy your evening all.
daugen
Epic Contributor
you're full of itJust did the math and YTD with 9 Golden Comet hens… 1139 eggs produced.
yolk yolk
daugen
Epic Contributor
went to check Google maps on the cherry stand I am stopping at tomorrow morning and find it is located near an interesting spot
PJSprog
Elite Member
87°F and a thunderstorm at the moment, down from a high of 92° just a littel while ago. Tried to post earlier, but the storm that snuck in ground our already slow satellite internet to a screeching halt. We've been flirting with triple digit temps here for the last couple of days, but never quite got there. Flashy, loud storm that blew through the area last night left us with only a tease of a little rain. Saw friends reporting some moderate to severe damage in other nearby areas. We've gotten some decent rain this afternoon, though. We need it in the worst way. Our pond is down three feet, and the ground is all cracked everywhere.
Still hopelessly behind in the reading here. Need to pop in more than just once every couple of weeks.
Hope everyone is well.
Happy Canada Day to our neighbors in The Great White North.
Still hopelessly behind in the reading here. Need to pop in more than just once every couple of weeks.
Hope everyone is well.
Happy Canada Day to our neighbors in The Great White North.
buckeyefarmer
Epic Contributor
PJ, been wondering how you was.
buckeyefarmer
Epic Contributor
Nice Joel!!