Good morning!!!!

   / Good morning!!!! #13,851  
I'm a little concerned about novices playing with capacitors unless they are very careful to make sure the ones already in there are fully discharged. Now the a/c has been long off, so everything has drained down, but disconnecting all the juice for at least an hour ahead of time would be smart. The jolt from a big cap can really wake you up, and not like the nice cup of coffee you just had.

Assuming you are desoldering and resoldering, just be careful not to heat up the surrounding area too much, those little clip on heat sinks can help. Luckily an a/c circuit board is not miniaturized like the ones in our clock radios or whatever.

many, many Heathkits later...

slept way in this morning, very unusual for us, lulled back to sleep by thunderboomers. The best kind of sleep, curled up together.

Best at anytime together my favorite
 
   / Good morning!!!! #13,852  
I'm a little concerned about novices playing with capacitors unless they are very careful to make sure the ones already in there are fully discharged. Now the a/c has been long off, so everything has drained down, but disconnecting all the juice for at least an hour ahead of time would be smart. The jolt from a big cap can really wake you up, and not like the nice cup of coffee you just had.

Assuming you are desoldering and resoldering, just be careful not to heat up the surrounding area too much, those little clip on heat sinks can help. Luckily an a/c circuit board is not miniaturized like the ones in our clock radios or whatever.

many, many Heathkits later...

slept way in this morning, very unusual for us, lulled back to sleep by thunderboomers. The best kind of sleep, curled up together.

Best at anytime together my favorite
 
   / Good morning!!!! #13,853  
Double posts don't you hate it
 
   / Good morning!!!! #13,854  
Good morning. 0830, cloudy, 78* with 94% humidity. Forecast high of 90* with 40% chance of thunderstorms. Only had one passing shower yesterday. Just enough to wet the car before I put it in the shed. I don't have to be at work until noon. We are cooking sausage and eggs, a rare treat with our mixed up schedules.
 
   / Good morning!!!! #13,855  
Best at anytime together my favorite

we hold hands and simply touch a lot, just our way,
but our attempts at sleeping closely together usually winds up with one of us
throwing the covers off as if the sauna was turned on. Too hot baby.
And then we go back to holding a finger or two, and then that slips away as we fall asleep.

probably repeated all over the world every night. :cloud9:
 
   / Good morning!!!! #13,856  
   / Good morning!!!!
  • Thread Starter
#13,857  
Morning, guys. Coffee is good, ready to do something here. Might get some seat time, I need to grade out my neighbor's drive. Lunch out today, then cleaning out the shop. Have a good one guys!!!
 
   / Good morning!!!! #13,858  
Yeah, but look at the good point...increases your post count without really trying...

Roy, I think you and I are in the same boat. The LAST thing I worry about is post count. Mine has grown to the point that I'm amazed at how I could ever have that many posts. Then, I just look at Bird's count . . . :D
 
   / Good morning!!!! #13,859  
good morning we are having showers moving thru looks to be about a .50 inch so far and 64 degrees turning sunny later with a high of 76.
 
   / Good morning!!!! #13,860  
good morning is it ever humid had 1/4 " rain last night. our computer crashed this week had everthing backed up but took for ever to restore. mil doing better probably as good as it get's but could be a lot worse. everyone have a great day.
 

Tractor & Equipment Auctions

Quick Attach Skid Steer Plate (A51573)
Quick Attach Skid...
2015 FORD E350 16FT BOX TRUCK (A52576)
2015 FORD E350...
2011 Ford F-150 4x4 Ext. Cab Pickup Truck (A51692)
2011 Ford F-150...
Ryobi Sliding Compound Miter Saw (A51573)
Ryobi Sliding...
2017 Peterbilt 567 Day Cab (A52384)
2017 Peterbilt 567...
3 Point 36'' Lay Off Three Rows Plow (A51573)
3 Point 36'' Lay...
 
Top