sodamo
Super Star Member
- Joined
- May 20, 2004
- Messages
- 15,838
- Location
- Big Island, HI
- Tractor
- LS XR4140H (Mine) BX2380 (wife’s)
Hmmm, diagonally… so helpful. How do I figure the angle? 
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 17444802
rswyan
Super Star Member
- Joined
- May 12, 2004
- Messages
- 11,412
- Location
- Northeast Ohio
- Tractor
- Kubota B2910, Cub Cadet Pro Z 154S, Simplicity 18 CFC, Cub Cadet 782
Hmmm, diagonally… so helpful. How do I figure the angle?
45 and 135 degrees ?
Which one you use depends on which end you’re cutting.
Last edited:
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
We actually have two walkers...one with 2 wheels, the other, no wheels. Had the wheeled one for a long time, but can't recall why we bought it or where it came from. Thinking about it, might have been when I screwed my back up in 2009
I was in the other end of the house when Suzette fell, so I don't know exactly what happened...but she was on the deck and couldn't get up, even with our help.
Last edited:
RoyJackson
Rest in Peace
- Joined
- Nov 17, 2001
- Messages
- 23,144
- Location
- Bethel, Vermont
- Tractor
- John Deere 4052R Cab,, Deere 855D UTV, Z920A Zero Turn Mower and assorted implements
2021-10-11, 0337
50° right now...high, about 70 today...
50° right now...high, about 70 today...
daugen
Epic Contributor
good morning all.
Hang in there Roy.
cloudy day today, 61 going up to 72
I have an eye appt this morning and then hoped to go to Ram dealership in Flemington NJ where my truck
was sold and I'm guessing serviced and find out what has been done to it. I want to do a transmission and radiator flush
but not if they have already been done once. Trans flush on this model says original fluid last 150k miles but every video online, and there
are a whole bunch about changing fluid in this 8 speed automatic, street wisdom says max 100k miles.
Not sure I'm going anywhere if they dilate my eyes, particularly since I lost my sun glasses in the move.
Drew, aren't you going to neutralize the rust before you treat it with something like Ospho.
Sure am, ordered a gallon of that also. Thanks. I used Ospho on my boat motors and really liked it plus it didn't smell terribly.
Really needs to be on a lift to do this right and on two different days to let the Ospho work overnight.
I have to drive past Chris' auto body in Lambertville on way to Ram dealer in Flemington, so might stop in and get a pro quote on fixing the fender lip rust
before I start making a mess. I insured this auto body place for over 20 years, wonder if they remember me. Owner's sons running the place now.
leaves are coming down, might make a pass with the mower and bagger this afternoon.
Hope you all have a nice day
don't forget to tell your wives you love them...
Hang in there Roy.
cloudy day today, 61 going up to 72
I have an eye appt this morning and then hoped to go to Ram dealership in Flemington NJ where my truck
was sold and I'm guessing serviced and find out what has been done to it. I want to do a transmission and radiator flush
but not if they have already been done once. Trans flush on this model says original fluid last 150k miles but every video online, and there
are a whole bunch about changing fluid in this 8 speed automatic, street wisdom says max 100k miles.
Not sure I'm going anywhere if they dilate my eyes, particularly since I lost my sun glasses in the move.
Drew, aren't you going to neutralize the rust before you treat it with something like Ospho.
Sure am, ordered a gallon of that also. Thanks. I used Ospho on my boat motors and really liked it plus it didn't smell terribly.
Really needs to be on a lift to do this right and on two different days to let the Ospho work overnight.
I have to drive past Chris' auto body in Lambertville on way to Ram dealer in Flemington, so might stop in and get a pro quote on fixing the fender lip rust
before I start making a mess. I insured this auto body place for over 20 years, wonder if they remember me. Owner's sons running the place now.
leaves are coming down, might make a pass with the mower and bagger this afternoon.
Hope you all have a nice day
don't forget to tell your wives you love them...
ronjhall
Super Star Member
Coffee is done brewing. 61° with partly cloudy skies this morning. Heading to 80° with clouds in afternoon. Picked up all the small rolls of fence from Saturday. Ready to put in trailer and take to recycler. Caught last 20 laps of NASCAR race. Ended the way I like it. PT this morning. Then will see what I am going to get into.
Sparrow's will pose for a picture.
Roy, good wife did not get hurt. Problem with many wheeled walkers. Is that you have to grip brake pedals to hold walker in place. My one aunt has one that always has wheels locked. Need to grip brake handles to release wheel.
Rich, hope you got wood split.
Thomas, that is a lot of leaf blowing.
Kyle, violin sounds like a cold winter indoor project.
David, putting flooring down on a angle. Sound like a good way to put yout narrow room flooring down. My compound saw has preset notches for different angle. Mark the 2 opposite angles and switch saw as needed.
Looking, hope customizing of conveyor went well.
Buppies, did you get the Land Cruiser. When I did the Barrett Jackson Auction a few years ago. They were getting good dollars for them.
Everyone stay safe and healthy.
Good Morning All.
Sparrow's will pose for a picture.
Roy, good wife did not get hurt. Problem with many wheeled walkers. Is that you have to grip brake pedals to hold walker in place. My one aunt has one that always has wheels locked. Need to grip brake handles to release wheel.
Rich, hope you got wood split.
Thomas, that is a lot of leaf blowing.
Kyle, violin sounds like a cold winter indoor project.
David, putting flooring down on a angle. Sound like a good way to put yout narrow room flooring down. My compound saw has preset notches for different angle. Mark the 2 opposite angles and switch saw as needed.
Looking, hope customizing of conveyor went well.
Buppies, did you get the Land Cruiser. When I did the Barrett Jackson Auction a few years ago. They were getting good dollars for them.
Everyone stay safe and healthy.
Good Morning All.
daugen
Epic Contributor
actually Don I ordered evaporust instead of ospho after reading that I had to wash off a white powder when dry plus evaporust
is allegedly less harmful to paint not being acidic.
this is when one dreams of having a lift in the garage...
is allegedly less harmful to paint not being acidic.
this is when one dreams of having a lift in the garage...
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,236
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
No Ron yesterday did not work out maybe later in the week or weekend
59 high of 76 today still cloudy in the mid 80s by Wednesday fall taking a break
Prayers for all
59 high of 76 today still cloudy in the mid 80s by Wednesday fall taking a break
Prayers for all
Buppies
Super Star Member
- Joined
- Oct 26, 2011
- Messages
- 12,236
- Location
- SouthWestern Virginia
- Tractor
- Kubota L5240 EX mark 60 in 29 hp Toro 60inch Z Master 21 inch walk behind Polaris 900 hunter edition 30in toro walk behind
Roy saying prayers Suzette recovery’s quickly
wngsprd
Super Member
64 and a bit of drizzle, heading to 74. Happy Columbus Day!
Ron, that was a lot of fence...I bet you're worn out.
Buppies, sorry that look at the Land Cruiser didn't work out.
Kyle, you'll be hearing some Mendolsohn and Dvorak concertos before you know it.
My son and new wife are stuck in Denver after Southwest cancelled their flight yesterday. They say Wednesday is the earliest they can get booked back to Raleigh. I think they are a bit excited that they can get a couple more Rocky Mountain hikes in. They've been texting amazing pix.
Cut on the outside spotlights about an hour ago...2 skunks, so I've got to get busy on a plan.
Bought a repair kit for one of the outside frost free faucet/sillcocks...couldn't find one for my brand...couldn't even find one on Amazon, so bought the Woodford brand that seems to be the big seller at HD. Not a single part fit. It used to only leak when turned on, but of course in disassembling the old one and reassembling, it now leaked even when turned off...so I had to rush to get to the hardware store (closest is 30 minutes) before they closed. I had turned the water off for the whole house.
Decided to try out Sharkbite and install a shut off valve on the 30 foot line that feeds this faucet, and also found a Sharkbite sillcock. Never used their products, but heard good things. So when I get home, I crawl back under the house and follow the water line back from the faucet to find the earliest spot I can install the shutoff. Voila, there is already one there! What luck. Flipped it off, came back inside and bragged how fast I fixed it to my wife. Then confessed. But I do have another use for the shutoff. It was getting too dark, so will do the faucet today.
Ron, that was a lot of fence...I bet you're worn out.
Buppies, sorry that look at the Land Cruiser didn't work out.
Kyle, you'll be hearing some Mendolsohn and Dvorak concertos before you know it.
My son and new wife are stuck in Denver after Southwest cancelled their flight yesterday. They say Wednesday is the earliest they can get booked back to Raleigh. I think they are a bit excited that they can get a couple more Rocky Mountain hikes in. They've been texting amazing pix.
Cut on the outside spotlights about an hour ago...2 skunks, so I've got to get busy on a plan.
Bought a repair kit for one of the outside frost free faucet/sillcocks...couldn't find one for my brand...couldn't even find one on Amazon, so bought the Woodford brand that seems to be the big seller at HD. Not a single part fit. It used to only leak when turned on, but of course in disassembling the old one and reassembling, it now leaked even when turned off...so I had to rush to get to the hardware store (closest is 30 minutes) before they closed. I had turned the water off for the whole house.
Decided to try out Sharkbite and install a shut off valve on the 30 foot line that feeds this faucet, and also found a Sharkbite sillcock. Never used their products, but heard good things. So when I get home, I crawl back under the house and follow the water line back from the faucet to find the earliest spot I can install the shutoff. Voila, there is already one there! What luck. Flipped it off, came back inside and bragged how fast I fixed it to my wife. Then confessed. But I do have another use for the shutoff. It was getting too dark, so will do the faucet today.
