Good morning!!!!

   / Good morning!!!! #125,441  
Eric.
Nice very nice looks like good place to retire. :thumbsup:
 
   / Good morning!!!! #125,442  
At the farm they had a cistern and a bucket pump affair. Two sprockets on a common shaft with a crank handle at one end. The buckets were mounted on the chains that had to be dipping the water about 10-15' down. This bucket pump affair was all enclosed in a wooden box that stood about 5' off the ground. It worked better than the lever pump which they had also. The windmill was only for water for the cattle, horses, sheep and pigs. I don't remember the breeds of sheep, cattle or pigs. But I do remember that they only plowed with Clydesdales. My cousin from the back farm would come over at haying time and cut and bale. My Dad and Uncle would stook the bales and I got to pull the baler with a Farmall C once I could reach the pedals.

I had a pet pig out there. My uncles (the people that owned the farm) told me that the pig would 'disappear' in the fall, that it was going to the big pigpen in the sky. My response was sure, that pig would reappear after it was killed as bacon and ham. They didn't try to pull the wool over my eyes after that.

The farm was about 30 miles from Niagara Falls, ON.
 
   / Good morning!!!! #125,443  
Good morning! 22 now, 32 later. Looks like some precipitation this weekend.

Think I did too much over the weekend. Was really tired all day yesterday. Got everything in town we forgot Sunday, and some other stuff that wasn稚 in stock Sunday. Made supper, that was about it.

Not sure what I will get into today

Everyone stay safe out there!
 
   / Good morning!!!! #125,444  
Good morning. It's 28° here this morning and looks like it will be foggy .. once it's gets light. It will struggle to get to 50° this afternoon. The Houston TV stations are calling this .. a "deep freeze"??

A Houston repair co. is coming this morning to pick up all our patio chairs, chaise lounges, etc to replace the sling material with new Sunbrella Fabric. We had same company (Allied Powder Coating) powder coat all these chairs plus 2 matching dining tables, 4 side tables and another set of similar furniture, at the pool, in 2006. It's held up well and this is significantly less cost that complete replacement. Both sets are about year 2000 vintage so we've got our money's worth.

After lunch .. I head into Columbus to run some errands then get my 1st COVID vaccine at 2:30 p.m.

Our monthly VFD Board meeting is this evening so .. not much ranch work will get done today. My supervisor will likely "dock my pay" today.

Congratulations to Alabama on a pretty decisive win and their 18th National Championship.

Hope everyone has an excellent day.

Prayers to all.
 
Last edited:
   / Good morning!!!! #125,445  
Good Morning
25 and heading to 40 with clear skies today.

Yesterday followed the plan, picked up kerosene and filled the heater in the hangar, noticed micro growth in cans, so cleaned them out with soap and water. Debating if I should put some biobor the heater tank.

I bought a press brake from Eastwood that works in a hydraulic press, but IMHO, has a huge design flaw. The parts to rectify that will be here today from McMaster Carr. I’ll post before and after pictures. Other than that small project, today is a day for paperwork and cleanup.

Looks like tomorrow has a Florida trip in store for me, I can’t complain, the last time I had to go anywhere was before Christmas. It’s an early start, but I should be back by 1.

My wife gets her second shot today, don’t know when I get mine, but the feds now say everyone over 65 is eligible now o it might be soon.
 
   / Good morning!!!! #125,446  
Good Morning!!!! 48F @ 4:30AM. Cloudy skies. High 58F. Winds light and variable.
Still no rain in the 10-day.

I don't think I've ever seen greener grass than that, Eric! Is that on the other side of the fence?:laughing:

Good to see progress on the vaccine front. A neighboring county has received 2400 doses but has only dispensed 120 of them. Each one takes 15 minutes to administer, there are 8 hours in the day, so they can only give 32 shots a day.:eek: I might jump an inoculation class if they keep dragging this out until June.:confused: It's a "don't call us, we'll call you" deal in this county.

Paid $7K for a full survey, including three corners, in '19, Mike. They also drove stakes every hundred feet or so, and did the paperwork at the county recorder's office. Hope you get off a lot easier.

Good pump and outhouse stories, folks. How quickly we've come to take running water for granted now adays, huh? Back in high school, one "friend" pushed a porta san over onto its door while a buddy was inside. That friendship never recovered.:laughing:

Thanks for the Shars link, Paul. It was an expensive visit, but I'm looking forward to the new boring bars, and a deburring tool to replace the one that broke the other day...

Finished the updates on the two firewood pallets yesterday morning just about the time the UPS man showed up with the new phone. The data migration took forever, and got stuck, so had to zero out the phone and start over. It ran most of last night, and looks pretty good this morning. Still hasn't been able to activate on the cellular network, but it's difficult to do when the cellular signal is so poor. Might have to wait for a town trip to do that. The OtterBox case fits great, though. And the new zoomed screen feature is just what these old eyes needed. I can read the fine print again!:thumbsup:

Got the 200 hour checks/maintenance on the M62 done, too. It was just a filter change on the hydro system, but that filter was on so tight it bent the handle of my filter wrench. Fortunately it was the kind with the notches cut around the rim, and I was able to break it loose with a hammer and drift. And in spite of what the shop manual sez, I didn't need to drain the fluid just to change the filter, but I did lose a couple of quarts. I also changed the engine oil and filter. The tractor didn't come with any maintenance records, so there was no way to tell when it had last been done. Or even if it ever had. The book calls for the first change at 400 hours, but after almost five years, it was way past time.

Got a quote for homeowner's insurance yesterday, and it's worse than I thought. $4800 for fire insurance only, another grand for the liability and contents coverage. This is with a $10K deductible, the $5K deductible was even dearer. Very tempted to go without, but in the long run, I don't think that's a very smart thing to do as fire seasons will only get worse from here on out. Insurance broker gave me two more companies to check out, so I'll do that today, but I'm not holding my breath on finding anything more reasonable.

Caught the second episode of a new series called CalFire. It's covering the 2020 fire season in California with video and interviews shot on the fire line. It's interesting to listen to the stories by both firefighters and homeowners, and see the tactics in action. But it's also an eye opener, in that when a fire grows past a certain size, there's not a lot that can be done except maybe try to light a back fire to rob it of more fuel. And that sometimes ends up making the situation even worse if the wind changes.
 
   / Good morning!!!! #125,447  
Good Morning!!!! 48F @ 4:30AM. Cloudy skies. High 58F. Winds light and variable.
Still no rain in the 10-day.

I don't think I've ever seen greener grass than that, Eric! Is that on the other side of the fence?:laughing:

Good to see progress on the vaccine front. A neighboring county has received 2400 doses but has only dispensed 120 of them. Each one takes 15 minutes to administer, there are 8 hours in the day, so they can only give 32 shots a day.:eek: I might jump an inoculation class if they keep dragging this out until June.:confused: It's a "don't call us, we'll call you" deal in this county.

Paid $7K for a full survey, including three corners, in '19, Mike. They also drove stakes every hundred feet or so, and did the paperwork at the county recorder's office. Hope you get off a lot easier.

Good pump and outhouse stories, folks. How quickly we've come to take running water for granted now adays, huh? Back in high school, one "friend" pushed a porta san over onto its door while a buddy was inside. That friendship never recovered.:laughing:

Thanks for the Shars link, Paul. It was an expensive visit, but I'm looking forward to the new boring bars, and a deburring tool to replace the one that broke the other day...

Finished the updates on the two firewood pallets yesterday morning just about the time the UPS man showed up with the new phone. The data migration took forever, and got stuck, so had to zero out the phone and start over. It ran most of last night, and looks pretty good this morning. Still hasn't been able to activate on the cellular network, but it's difficult to do when the cellular signal is so poor. Might have to wait for a town trip to do that. The OtterBox case fits great, though. And the new zoomed screen feature is just what these old eyes needed. I can read the fine print again!:thumbsup:

Got the 200 hour checks/maintenance on the M62 done, too. It was just a filter change on the hydro system, but that filter was on so tight it bent the handle of my filter wrench. Fortunately it was the kind with the notches cut around the rim, and I was able to break it loose with a hammer and drift. And in spite of what the shop manual sez, I didn't need to drain the fluid just to change the filter, but I did lose a couple of quarts. I also changed the engine oil and filter. The tractor didn't come with any maintenance records, so there was no way to tell when it had last been done. Or even if it ever had. The book calls for the first change at 400 hours, but after almost five years, it was way past time.

Got a quote for homeowner's insurance yesterday, and it's worse than I thought. $4800 for fire insurance only, another grand for the liability and contents coverage. This is with a $10K deductible, the $5K deductible was even dearer. Very tempted to go without, but in the long run, I don't think that's a very smart thing to do as fire seasons will only get worse from here on out. Insurance broker gave me two more companies to check out, so I'll do that today, but I'm not holding my breath on finding anything more reasonable.

Caught the second episode of a new series called CalFire. It's covering the 2020 fire season in California with video and interviews shot on the fire line. It's interesting to listen to the stories by both firefighters and homeowners, and see the tactics in action. But it's also an eye opener, in that when a fire grows past a certain size, there's not a lot that can be done except maybe try to light a back fire to rob it of more fuel. And that sometimes ends up making the situation even worse if the wind changes.

As wild land fires increase in size .. they can create their own winds and you can soon be chasing your tail. "Fight it from the Black" is our first rule. If you don't .. you're part of the "fuel".

When we've been involved in bigger fires we assign some members to be observers only (think NASCAR spotters) to "see the big picture" as conditions change. Luckily we all have radios too. Some bigger departments are now using drones as well for wild land fires.
 
   / Good morning!!!! #125,448  
Good morning all, 23 going up to 44 and sunny.
Got hard drives yesterday and have temporary NAS up and running, waiting a few days to make sure drives are good and then need to buy a license. 4TB of space to fill!

Need to do repairs on some of the larger Xmas lawn ornaments.

RNG - and I thought insurance was high here, hope you can find a better rate.

Back to the grind.

Stay safe and be well
 
   / Good morning!!!! #125,449  
Thanks for the Shars link, Paul. It was an expensive visit, but I'm looking forward to the new boring bars, and a deburring tool to replace the one that broke the other day...

Got the 200 hour checks/maintenance on the M62 done, too. It was just a filter change on the hydro system, but that filter was on so tight it bent the handle of my filter wrench. Fortunately it was the kind with the notches cut around the rim, and I was able to break it loose with a hammer and drift. And in spite of what the shop manual sez, I didn't need to drain the fluid just to change the filter, but I did lose a couple of quarts..

I forgot to ask whether the boring bars were for a lathe or a boring head in a mill.
I had the same experience with the Hydro filter on my L6060, but I went right to the hammer and drift once it was obvious it wasn’t going to move easily. Also didn’t lose much oil.
 
   / Good morning!!!! #125,450  
landlord left, she agreed to do the walkway repairs, I agreed to do the interior touch up painting.
Good deal for me. She left leftover interior trim paint, which is what I need for fixing doorways.

Cold out, still in 20's, and still. Sun is coming up and looks to be a nice winter day.

new funnel came in, so I filled the snowblower with my gallon of TruFuel 92 octane E0. Stuff
had an awful smell, full of chemicals I'm sure.
Now to haul out the instapot and get that going on a pot roast.
Then a trip downtown to wine store. Not much excitement.
 

Tractor & Equipment Auctions

New Wolverine 3pt Receiver Hitch (A53002)
New Wolverine 3pt...
2020 PETERBILT 567 TRI-AXLE MID-ROOF SLEEPER (INOPERABLE) (A52472)
2020 PETERBILT 567...
JOHN DEERE LOT NUMBER 124 (A53084)
JOHN DEERE LOT...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2000 Thomas Built Saf-T-Liner MVP-ER Transit Passenger Bus (A51692)
2000 Thomas Built...
1997 JOHN DEERE 544G WHEEL LOADER (A52472)
1997 JOHN DEERE...
 
Top