Gemplers Quick Fill Attachment

[marc2000gt]

Does the Gemplers Quick Fill Tire Attachment fit a standard valve stem? Quick Fill Tractor Tire Attachment, Tires & Supplies - GEMPLER'S

I read where someone had to take part of their valve stem apart to use it. I know the shrader valve has to come out, but that is all that comes apart on mine. The post I read had another part to their valve stem.

 

[Don Kubly]

The AQFI quick fill attachment will not fit a standard valve stem. If you have the standard valve stem you will need an Air/Liquid Adapter Kit which has
the small adapter to fit the standard valve stems. I have added the link to the one you need.

Air/Liquid Adapter Kit, Tires & Supplies - GEMPLER'S

Here is a link with step-by-step instructions on how to use the Air/Liquid Adapter Kit.

Tips on Using the Air/Liquid Adapter Kit | Gempler's

Thanks, If you have questions you can visit our web site at
GEMPLER'S - Official Site - Your Source for Outdoor Work Supplies.

Don Kubly
Gempler's Tire Specialist

 

[marc2000gt]

Thank you Don. I will be in touch about ordering the piece you listed. I wanted the one with the auto air release, but I did not think it was going to work for me.

 

[gemini5362]

sounds like a good product. I noticed they also have a product on their website that will seal holes up to a 1/2 inch in diameter. I know it is a stupid question but I wrote to them asking how well their sealant would work if after I installed it I filled the tire with water