Gear Whine
- Thread starter atk_man
- Start date
- Views: 2123
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,108
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Yep..after a while you'll hardly notice the sounds,if not ear plugs /w3tcompact/icons/frown.gif
Egon
Epic Contributor
Ear Plugs and ear muffs do wonders for silencing all the different noises.
Like Thomas says they are a little mule.
Mine has all the loader pins worn so everything can be shaken by hand. In fact the lower two on the bucket actually wore out and had to be replaced but with a bolt and nylon lock nut. The loader frame and bucket have numerous welds on them from digging out rocks and tree stumps. The bucket cutting edge is wore out and needs replacement. I've also had it standing up at about 45 degrees trying to shove a tree over. It's pulled numerous rocks by filling the bucket with rocks and then putting as much lift on the three point as possible to get traction. 1600 hours and does not use any oil. My only complaint is the hydro pedal not centering properly anymore.
It has served me well.
Egon
Like Thomas says they are a little mule.
Mine has all the loader pins worn so everything can be shaken by hand. In fact the lower two on the bucket actually wore out and had to be replaced but with a bolt and nylon lock nut. The loader frame and bucket have numerous welds on them from digging out rocks and tree stumps. The bucket cutting edge is wore out and needs replacement. I've also had it standing up at about 45 degrees trying to shove a tree over. It's pulled numerous rocks by filling the bucket with rocks and then putting as much lift on the three point as possible to get traction. 1600 hours and does not use any oil. My only complaint is the hydro pedal not centering properly anymore.
It has served me well.
Egon