Gear lube for brush hog
- Thread starter momark
- Start date
- Views: 6335
Farmwithjunk
Super Member
momark said:
Some manuals call for 90WT gear oil. Some say 120WT. I've seen several old mowers with leaky gear box seals using pourable grease or even regular "axle grease".
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
momark:
Welcome to TBN
! I have had 3 rotary cutters: Woods M-40 (40"), Tebben TC96-40 (40"), and a Tebben TC94-500 (60"). Recommendations for gearbox lube were always 80W-90 gear lube. Jay
Welcome to TBN
! I have had 3 rotary cutters: Woods M-40 (40"), Tebben TC96-40 (40"), and a Tebben TC94-500 (60"). Recommendations for gearbox lube were always 80W-90 gear lube. Jay
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
On an older unit.. I'd use 85-140, unless i knew the specs called for 80w90.
If it leaks a little, use JD cornhead (pourable) grease.
If ya can't get it, any 0# grease will work... or just get most of the gear oil out and pump in regular tube grease, and let it mix with the remaining gear oil to make a sticky flowable mess..
Soundguy
If it leaks a little, use JD cornhead (pourable) grease.
If ya can't get it, any 0# grease will work... or just get most of the gear oil out and pump in regular tube grease, and let it mix with the remaining gear oil to make a sticky flowable mess..
Soundguy
RalphVa
Super Member
- Joined
- Dec 19, 2003
- Messages
- 7,885
- Location
- Charlottesville, VA, USA
- Tractor
- JD 2025R, previously Gravely 5650 & JD 4010 & JD 1025R
I'd use 85-140. It'll be less viscous at startup than 80-90w that most specify and be more effective in getting lube swirled around quicker.
Ralph
Ralph
joeblow8008
New member
- Joined
- Sep 29, 2013
- Messages
- 13
- Location
- Florence, SC
- Tractor
- 1947 International Harvester A - I , 1951 Farmall Super C,1986 Longs 460 Diesel
why are there so mach variation on price on brush cutters...i see on ebay some are buy now for $750 and some are much cheaper....i have a 4 ft and a 5 ft and don't know the name on either...i don't see a brand name anywhere on them...both work properly and i was thinking of selling one of them? any thoughts?
kenmac
Super Member
- Joined
- Feb 13, 2005
- Messages
- 9,837
- Location
- The Heart of Dixie
- Tractor
- McCormick CX105 Kubota MX 5100 HST, Kubota ZD1021, Kawsaki Mule 4010 trans 4x4
some light duty, some medium duty, some heavy duty, Heavy duty being priced higher. Some will have higher rated gear boxes.
