FX26D

Rusty26 · Sep 12, 2004

Hi, this is my first post but I have been reading them for a long time now. I have an FX26D and was wondering if many parts would possibly interchange with an FX24D. Also what service manual would be the closest for this tractor. Lastly, there is a small knob directly under the seat, I'm not sure what it does, I believe it has something to do with the hydraulics, any help would be appreciated. Sorry for this long post. /forums/images/graemlins/cool.gif Rusty

cfoxmd · Sep 12, 2004

I think the knob adjusts the rate at which the three point goes down.

Rusty26 · Sep 12, 2004

cfoxmd Thanks for the info., I was curious to know if your machine has more than usual blowby, as our tractors have similar # of hours. Thanks again. <><

YanmarFever · Sep 13, 2004

Rusty
That little slide knob under the seat on mine shuts off the hydraulics to the rear.
Theres a rule that all new members must post a picture of their machines ! so how about it heh?
Ernie <><
www.ernies.net

Rusty26 · Sep 13, 2004

Ernie, You got it. Thanks for the info. It has a Marukyu Model 1610 I believe. (The decals are faded and chipping.) The front bucket has since been beefed up. I noticed that the sub-frame appears to be very heavy and the front of the loader resembles many dozer loaders.(just my 2 cents) <>< /forums/images/graemlins/cool.gif

YanmarFever · Sep 13, 2004

Rusty
It looks like a heavy duty allright, be careful with that loader bucket being so far out in front of the tractor.
Ernie

Rusty26 · Sep 14, 2004

Ernie, I did notice that it sits farther out than the Koyker, Great Bend loaders, I guess it might not have the low center of gravity that these others do and could possibly tip the tractor more easily. Thanks for the reminder. Have a good one. /forums/images/graemlins/cool.gif