fuse problem

[yardman66]

I have a Bobcat 341 excavator I need to know where the 2 speed solenoid is located Ive tried the dealer but they dont call me back I keep blowing the fuse so I want to test the solenoid Thanks

 

[radios1]

also, look for corrosion on the fuse holder, which makes a bad contact, and heats up the fuse, making it blow under normal current!..

 

[yardman66]

thanks I will check that also

 

[SSdoxie]

The 2 speed coil is on the manifold block, a rectangular aluminum block just below the control valve with an accumulator at one end. Location of the solenoid changes with serial numbers, but most blocks had 4 solenoid coils 3 of the coils were PWM (variable opening) and 1 for speed is simple on/off. Look for the one that is different. Probably second one from accumulator end.

 

[yardman66]

Thank you for getting back to me I really appreciate the information