sirgknight
Silver Member
Has anyone changed out their wire fuse box with a modern fuse block and standard fuses? It seems to me that it's the sensible thing to do to simplify changing the fuses. Just need to know what amperage to use.
Fuse Box
- Thread starter sirgknight
- Start date
- Views: 2281
1danny
Platinum Member
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 52,424
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
If I'm not mistaken.. he has a 1700.
And I changed out my fuse panel with one from a jap car in the junkyard.. found a nice little one to tuck under the dash cowling.
Soundguy
And I changed out my fuse panel with one from a jap car in the junkyard.. found a nice little one to tuck under the dash cowling.
Soundguy
Inspector507
Super Member
Fuse Block includes 30A relay, 30A breaker, 3-7 circuits, hardware and terminals.
OP
sirgknight
Silver Member
Oops, sorry. yes i have a 1700LD. thanks for the info.
Mslater
New member
I changed out the fuse box on my ym2000, found a 4 bus fuse block at orielly for 1.99 and a pack of fuses for .99. Used the same mounting holes and screws. By far the easiest upgrade I have done.
