63DH8
Gold Member
- Joined
- Feb 6, 2005
- Messages
- 261
- Location
- Parkland,Washington State, U.S.A.
- Tractor
- Massey Ferguson GC1725M Bolens TX 1504 (G154) 1957 John Deere 420C crawler
double post
frozen balls 3ph
- Thread starter sal64
- Start date
- Views: 3747
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
kroil is 'order only' around here.. and by the time you pay shipping.. you could have bought a case of pb blaster. So far I've not found a nut that wouldn't come off with pb, that was going to come off. I have had to cut a few off.. and the condition those were in.. well.. they were destined to be cut off no matter what oil you put on them.
if kroil had some local distribution.. it might get used more..
soundguy
if kroil had some local distribution.. it might get used more..
soundguy
63DH8
Gold Member
- Joined
- Feb 6, 2005
- Messages
- 261
- Location
- Parkland,Washington State, U.S.A.
- Tractor
- Massey Ferguson GC1725M Bolens TX 1504 (G154) 1957 John Deere 420C crawler
I've been telling my older brother I'm going to be visiting him. He lives somewheres in South Palm Beach. What's a box of Kroil to a F-250? 
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
eh?
soundguy
soundguy
Kroil is darn good stuff, I see the PB blaster in quite a few places I visit, never see the kroil alway's mail order it.
Anyone ever clean up the three point pivots and then spray them with a dry film lube like Graphite or Moly,instead of grease or oil?
Have fun
Anyone ever clean up the three point pivots and then spray them with a dry film lube like Graphite or Moly,instead of grease or oil?
Have fun
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
I don't lube mine -usually-.. just working them keeps em loose.
soundguy
soundguy
63DH8
Gold Member
- Joined
- Feb 6, 2005
- Messages
- 261
- Location
- Parkland,Washington State, U.S.A.
- Tractor
- Massey Ferguson GC1725M Bolens TX 1504 (G154) 1957 John Deere 420C crawler
Messin with you.
If you want some, I can pick up several cans and send them. There's tons of industrial hardware warehouses around here that'll be happy to sell a box or two.The Dougster
Gold Member
Haven't I read somewhere that a mixture of acetone and transmission fluid works great? Mebbe in a dream? lol
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
transmission oil, mixed with a bunch of different types of slvents have been backyard mechanics 'penetrating oil' of choice for years. i usually mix atf + diesel, or kerosene, or mineral spirits, or naptha.. depending on what i have on hand.. or what I'm doing.
soundguy
soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Messin with you.
Hmm.. now there's a thought.. I've only been looking for froil at retail outlets. etc.. I think I'll hit our local mechanic and industrial / contractor supply houses.
thanks for the idea.
soundguy
