Front Wheel Drive stopped working FIXED

[dannyjkelly]

I researched after the 4X4 won't engage, and thought I was into a major tear down.

Long story short:
The Front wheel drive shaft is held on to the transmission and front axle by a coupler.
There is a drift pin to keep the coupler from moving off either shaft.
The front drift pin fell out and the coupler slid all the way back to the transmission.
Once I FIND A Drift pin that fits, It's clean up time!

 

[seacap04]

Welcome to TBN. In this age of push button and electronic controls, it is easy to get wrapped in the electrical path as the problem. Good insight to check mechanical. Glad your issue is fixed.