Xfaxman
Super Star Member
- Joined
- Feb 8, 2013
- Messages
- 12,889
- Location
- Guthrie, OK
- Tractor
- Toolcat 5610 G - Bobcat V417 - TORO+Loader
You are going to have to put a steering wheel on it and modify the spindles, before it becomes productive. 
Found a tractor in the brush today
- Thread starter bcp
- Start date
- Views: 6494
dodge man
Super Star Member
I have this picture of a grown man, using a piece of string as a tow rope, pulling out the toy tractor and making pretend engine sounds.
prichard
Veteran Member
Lmao.
2LaneCruzer
Super Member
That shouldn't take long.
2LaneCruzer
Super Member
The tractor is out!
Using my smallest recovery strap, (3/8 x 6ft) the first job was removing the log that blocked in the tractor.
Then I gradually turned it outward, pulling gently on the front axle, and clearing brush as needed.
Here is is pulled out onto the road and in the parking area. The loader and bucket still work, after the pins were cleaned and replaced. And all four tires were still good! It even has front weights.
The driving controls have no looseness at all. They feel really solid.
Restoration photos will come later.
Bruce
Using my smallest recovery strap, (3/8 x 6ft) the first job was removing the log that blocked in the tractor.
Then I gradually turned it outward, pulling gently on the front axle, and clearing brush as needed.
Here is is pulled out onto the road and in the parking area. The loader and bucket still work, after the pins were cleaned and replaced. And all four tires were still good! It even has front weights.
The driving controls have no looseness at all. They feel really solid.
Restoration photos will come later.
Bruce