Forklift Stand Add-On

[Big Barn]

I built this a long time ago....




Bought this 3 years ago. Just rebuilt floor in man basket last weekend. Probably won't get around to repainting machine till next spring.

Terry

 

[Blade Breaker]

I built one of those also. This one is 4x8 but I built it with a 3' elevated platform. Forks go to 11'6" so I can get to 14'6". Its made from 3" x 1/4" angle so its a bit overkill but who knows how many shingles or ?? someone will load onto it. Wish I had a remote control to operate the tractor but I guess that's what brother in laws are for.

 

[Big Barn]

It won't work with your loader,but when I used my man basket with the shop or rough terrain forklift I used a length of heavy wall 1/2" PVC pipe attached to the lift lever via socket joint to lift and lower myself. Make sure one end is attached to the basket with a lanyard....

Terry

 

[DocDryden]

I'd like to try an IBC tote. I would remove the plastic insert.

 

[s219]

I remember my pop lifting me up with the forklift to change lightbulbs in his shop (20' ceilings). We nailed some 2x4 railings onto a pallet and called it done! OSHA would have shut him down for sure.

 

[Big Barn]

I remember my pop lifting me up with the forklift to change lightbulbs in his shop (20' ceilings). We nailed some 2x4 railings onto a pallet and called it done! OSHA would have shut him down for sure.

Haha. Nothing like being 14 feet up in the air and hoping your pop doesn't bump the tilt lever! Terry

 

[s219]

Haha. Nothing like being 14 feet up in the air and hoping your pop doesn't bump the tilt lever! Terry

I think the big joke in his shop was tooting horns whenever someone walked in front of a truck or was up in the forklift changing lightbulbs. Never got old unless you were the one getting scared....

 

[Big Barn]

I think the big joke in his shop was tooting horns whenever someone walked in front of a truck or was up in the forklift changing lightbulbs. Never got old unless you were the one getting scared....

Always good for a laugh...or change of underwear.

Terry

 

[MinnesotaDaveChalmers]

I think the big joke in his shop was tooting horns whenever someone walked in front of a truck or was up in the forklift changing lightbulbs. Never got old unless you were the one getting scared....

I tend to use a little blast from the air blow gun on people as they are bent over trying to get a tiny nut and bolt started

Or, if my dad is trying to tell my brother something, keep hitting the air ratchet trigger every time he says something (standing behind him) so my brother can keep saying "what?" "what?" "speak up"

....that cracks me up....lol

 

[s219]

Or, if my dad is trying to tell my brother something, keep hitting the air ratchet trigger every time he says something (standing behind him) so my brother can keep saying "what?" "what?" "speak up"

That's a good one.