Ford 4400 Double Hydraulic Remote Info Needed

[DonovanC]

Does anyone know if its posible to install a hydraulic remote on a 4400. Asking cause everything i see is a 4 bolt mounting set up. When the actual lift cover block off plate is a 5 bolt system. Last thing i would like to get done due to having it as a usable Tractor.

D4014C
OH18B
*C281244*
1970 4400

 

[Dman1981]

Call this place Meyer ward tractor
Have a bunch of used stuff
(559) 824-0558

 

[jimglassford]

According to the parts catalogs, it takes the same hydraulic valve as all of the thousand series tractors. OEM part numbers: 83944762, D7NNB950B, E2NNB950CA

 

[TractorTech]

Beautiful tractor!!!!

It is a four bolt setup for the original Ford valve(s) and some of the aftermarket ones. One here used:

Ford 4400 Dual Hydraulic Valve, Used - 497505

Ford 4400 Dual Hydraulic Valve, Used for sale, 497505. For Ford tractor models 2000, 2100, 2110, 2120, 2300, 2310, 2600, 2610, 2810, 2910, 3000, 3100, 3110, 3120, 3230, 3300, 3330, 3400, 3430, 3500, 3600, 3610, 3900, 3910, 3930, 4000, 4110, 4130, 4140, 4200, 4230, 4330, 4340, 4400, 4410, 4500...

www.yesterdaystractors.com

Gannon/McGee valve used five bolts. One here with four valves, but most were two or three valves:

Gannon 4 Spool Auxiliary Hydraulic Control Valve For Ford Tractor

Myer Ward in California as mentioned, Alexander Tractor in Texas, Abilene Machine in Kansas and many other salvage yards would have used valves to keep it original.