Ford 4400 Double Hydraulic Remote Info Needed

   / Ford 4400 Double Hydraulic Remote Info Needed #1  

DonovanC

New member
Joined
Jul 24, 2022
Messages
3
Tractor
Ford 4400
Does anyone know if its posible to install a hydraulic remote on a 4400. Asking cause everything i see is a 4 bolt mounting set up. When the actual lift cover block off plate is a 5 bolt system. Last thing i would like to get done due to having it as a usable Tractor.

D4014C
OH18B
*C281244*
1970 4400
IMG_5173.jpg
IMG_9122.JPG
 
   / Ford 4400 Double Hydraulic Remote Info Needed #2  
Call this place Meyer ward tractor
Have a bunch of used stuff
(559) 824-0558
 
   / Ford 4400 Double Hydraulic Remote Info Needed #3  
According to the parts catalogs, it takes the same hydraulic valve as all of the thousand series tractors. OEM part numbers: 83944762, D7NNB950B, E2NNB950CA
 
   / Ford 4400 Double Hydraulic Remote Info Needed #4  
Beautiful tractor!!!!

It is a four bolt setup for the original Ford valve(s) and some of the aftermarket ones. One here used:


Gannon/McGee valve used five bolts. One here with four valves, but most were two or three valves:

Myer Ward in California as mentioned, Alexander Tractor in Texas, Abilene Machine in Kansas and many other salvage yards would have used valves to keep it original.
 

Attachments

  • Remote valve.jpg
    Remote valve.jpg
    174.8 KB · Views: 138

Tractor & Equipment Auctions

WESSEX 1.5T LOT NUMBER 172 (A53084)
WESSEX 1.5T LOT...
2015 PETERBILT 367 SLEEPER (A52576)
2015 PETERBILT 367...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2016 Ford F-450 Pickup Truck (A51692)
2016 Ford F-450...
Genie GTH-644 (A50490)
Genie GTH-644 (A50490)
2018 Vermeer Chipper (A51573)
2018 Vermeer...
 
Top