Ford 4000, only Idles

/ Ford 4000, only Idles #1  

kenhillak

New member
Joined
Sep 11, 2012
Messages
2
Location
Willow , Alaska
Tractor
ford 4000
I have a Ford 4000, diesel 3 cyl that I am putting back together after a ring job. I have it running but it will only idol, 700rpm or less. When i give it more fuel it runs very poorly, boggs down, black smoke and will not go over 1000rpm. I have overhauled the injectors, and injector pump. all new fuel filters and clean fuel. As far as pump timing I just set it at the 0 mark, if it idols nice, does it still need more timing. Or could it be my injector pump needs re overhaul?. Any thoughts Thanks KEN
 
/ Ford 4000, only Idles #2  
G'day check on what the correct timing should be 0 deg does not sound right it should be more like 25btdc. I will check at work to see if I have a book on them and post back.

Oh and :welcome:

Jon
 
/ Ford 4000, only Idles
  • Thread Starter
#3  
Thanks so much for the reply. I found the problem, when I was doing the ring job I stuck a rag in the intake so i wouldent stupidly drop anything in there. go figure. so once the rag was removed all worked as it should. KEN
 

Marketplace Items

2004 Case JX75 (A64126)
2004 Case JX75...
2021 Kubota KX080-4 (A64126)
2021 Kubota...
John Deere 50 (A60462)
John Deere 50 (A60462)
Landhonor MPF-11-2000G Skid Steer Pallet Forks  (A62679)
Landhonor...
2020 ISUZU NRR 4X2 S/A 22FT BOX TRUCK (A59912)
2020 ISUZU NRR 4X2...
2007 Ford F-450 Flatbed Truck, VIN # 1FDXF46P77EA72394 (A65563)
2007 Ford F-450...
 
Top