Ford 3000, 1966, 3 cyl, gas: The tractor is clean with no rust and runs great. Of the 5 indicators in the Instrument Cluster, ONLY the generator light works. The oil light, temperature gauge, fuel gauge and tachometer do not work. I want to get these indicators performing again. Any idea if there is a common denominator causing the 4 indicators to not work while the generator light works normally? How would I diagnose this problem?
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
The tach and hour meter are cable driven.
The temp and fuel gauges are powered by a voltage stabilizer attached to the rear of the cluster housing. The charge and oil lamps share a common 12v supply.
You have multiple causes for the various concerns.
The temp and fuel gauges are powered by a voltage stabilizer attached to the rear of the cluster housing. The charge and oil lamps share a common 12v supply.
You have multiple causes for the various concerns.
