Turbofarmer
New member
Have taken head off our 3000 was expecting to find burnt out valves because of chuffing sounds when running but valves all ok, any ideas what noise might be ?
Ford 3000 engine
- Thread starter Turbofarmer
- Start date
- Views: 1496
-
- Tags
- ford 3000
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Too bad you didn't ask this BEFORE you took the head off, when we could have actually had you do some diagnostic tests. 
( that needed the head on! )
1, you could have done a dry then wet compression test. This would have told us the general health of the engine via dry compression, ballanced with knowing that if it is a low number, if it was rings or valves, or a head gasket.
2, If it was a gasser, we could have done ignition tests to see if the chuffing was cyl related, or moved.
3, if it was a diesel, we could do a similar injector test.
As it is now, do the valves all move correctly?
( that needed the head on! )1, you could have done a dry then wet compression test. This would have told us the general health of the engine via dry compression, ballanced with knowing that if it is a low number, if it was rings or valves, or a head gasket.
2, If it was a gasser, we could have done ignition tests to see if the chuffing was cyl related, or moved.
3, if it was a diesel, we could do a similar injector test.
As it is now, do the valves all move correctly?
