Welcome to TBN. 
Briana03
Elite Member
Hello & WELCOME to TractorByNet.com!
I have moved your thread to the Ford Forum. You'll get a better response there.
I have moved your thread to the Ford Forum. You'll get a better response there.
RickB
Super Star Member
- Joined
- Sep 18, 2000
- Messages
- 15,143
- Location
- Up the road from Dollar General WNC
- Tractor
- Just a Scag
A six point, 9/16" flex socket with 3/8" drive, a 6" 3/8" drive extension, and ratchet. You may choose to remove the fuel filter, or complete fuel filter assembly to give a little more room. Put at least one of the outer bolts back in and tighten until the back bolt is out.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
ditto 100% what rick said.
the back bolt is a beast.. but the ratched, extension and sivel DOES get it done. I opeted to relocate the fuel filter housing a bit to make it easier to get a hand in there... but probably could have down it with it in place maybee lost a lil more skin.. or cussed another coule minutes...
soundguy
the back bolt is a beast.. but the ratched, extension and sivel DOES get it done. I opeted to relocate the fuel filter housing a bit
to make it easier to get a hand in there... but probably could have down it with it in place maybee lost a lil more skin.. or cussed another coule minutes...soundguy
ferguson123
Silver Member
- Joined
- Jan 20, 2011
- Messages
- 101
- Tractor
- massey ferguson
they are pure awkward to get at. i usually just leave it out for next time. incase starter ever has to come off again :laughing:
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
imho.. leaving the 3rd bolt out is inviting it to break the other 2..
soundguy
soundguy
