marrt
Platinum Member
Neighbor has a Ford 2000 and the lift only goes up a couple feet. It will maintain this level, but won't go any higher. Any ideas as to the cause? Could he have the draft control in the wrong position?
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
More than likely he has cam / cam follower pin wear. doesn't take much wear to loose lift resoloution / response.
would help to know if this is the older 4 cyl 63/64 2000 or the newer 65+ 2000.. the lift covers are a bit different on them.
soundguy
would help to know if this is the older 4 cyl 63/64 2000 or the newer 65+ 2000.. the lift covers are a bit different on them.
soundguy
OP
marrt
Platinum Member
Thanks for the reply. He's found a tractor mechanic (friend of a friend) to take a look.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
An import model eh?
soundguy
soundguy
