Ford 2 N cut out

   / Ford 2 N cut out #1  

Bingo1943

New member
Joined
Nov 19, 2022
Messages
10
Tractor
Branson 3520cx
gm hope u can help
I have a 1944 2 n with 6 volt pos. Ground
Issue with cut out..my generator single pole with adjustable brush
I need help with installing VR. Asking what VR to buy and how to connect wires
THANK U FOR assistance..
 
   / Ford 2 N cut out #2  
Is the cutout bad?

Many of my cars have cutouts… some I removed the guts and replaced with a diode…
 
   / Ford 2 N cut out #3  
gm hope u can help
I have a 1944 2 n with 6 volt pos. Ground
Issue with cut out..my generator single pole with adjustable brush
I need help with installing VR. Asking what VR to buy and how to connect wires
THANK U FOR assistance..
I think you would need to replace your generator if you upgrade to a voltage regulator:
1731102623220.png
 
   / Ford 2 N cut out #4  
The 3-brush, single wire Ford generators can/must be adjusted to a neutral "motoring" state for best performance. There's also a voltage regulator available for the Model T that should work for the single wire tractor generator too. I used to rebuild Model T generators and starters back in my shop days. I still have my shop-built test stand.

Test Stand.jpg
 

Tractor & Equipment Auctions

(8) 2 PLUG VALVES (A52472)
(8) 2 PLUG VALVES...
CFG MH12RX Mini Excavator (A49461)
CFG MH12RX Mini...
Sky Trak 10054 Legacy 10K Telehandler (A51573)
Sky Trak 10054...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2012 DIAMOND CARGO FOOD TRAILER (A52472)
2012 DIAMOND CARGO...
 
Top