Cornskillet
New member
My Ford 1300 die as I was starting the PTO and the transmission. Now the injector pump is not pumping fuel to the injectors. Is there a way to test the pump before paying $$ for a rebuild?
Ford 1300 injector pump
- Thread starter Cornskillet
- Start date
- Views: 5539
-
- Tags
- ford 1300
jones6780
Gold Member
- Joined
- Nov 30, 2008
- Messages
- 417
- Location
- Lizella, Ga.
- Tractor
- Ford 1700 4wheel drive, Yazoo/Kees Max2 Zero Turn
Did you get this solved? Did you rum out of fuel or have trash blockage? Start at the fuel tank and check for fuel flow. Work your way down to the filter and finally the injector pump. If you have good gravity fuel flow the next step is loosen the lines at the injector and crank the engine over, looking for fuel at the loosened fittings. Be careful not to overheat the starter.
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
ditto.. check fuel delivery TO pump first..