Just finished replacing the head on a 1210. She runs but the is a compression leak between the head and the injectors. There is combustion gas leaking from the threads on the injectors. All copper seals, two per cylinder, are new, parts clean and tight. Any ideas on this?
Looks as if the previous owner has a sealant on the threads. Tractor was bought with a crack in number 2 between valves with water erosion. Midwest Cylinder Head welded and worked over the head.
Looks as if the previous owner has a sealant on the threads. Tractor was bought with a crack in number 2 between valves with water erosion. Midwest Cylinder Head welded and worked over the head.
