flexpoit hitch

[planman8]

Does anyone who has a 2305 have a flexpoint hitch ? I have conflicting info as to whether or not it will fit. I posted this on the attachment section and knowone there with a 2305 had one. I might go to the ezmover hitch which I know will work or the one from bad river, but I like the look of the flexpoint.
Thanks, planman

 

[kennyd]

It seems to be standard CAT 0, 1 or 2 hookup, so why do you think it will not fit the 2305?

Just to be sure, this is what your looking at correct?
Tractor Hitch-FLEXPOINT TRACTOR HITCH SYSTEM - Summit Fabrications,Inc.

 

[ducati996]

Just another option -which works really well, and costs less

Bad River 3-Point Hitch to 2" Receiver Adapter

 

[kennyd]

Ducati,
He mentioned that unit in his original post

 

[ducati996]

Ducati,
He mentioned that unit in his original post

Youre right - I missed that entire part....thats too funny

 

[planman8]

Kennyd,
The reason I don't think it will fit is that a local farm supply store said the cat 1 has a pin to pin size of 30 1/4". My 2305 drawbar pin to pin is just shy of 25" and I don't think the draft arms will spread wide enough. The flexpoint site doesn't give this info so I can only hope the supply store is correct. I contacted summitfab who makes flexpoint and was told that they weren't aware of a limited cat 1 like the 2305 has and didn't know if it would fit or not.
If they don't know, I sure don't. You would think they would know more about tractors. The pins for the cat 1 are the wrong size.
Thanks, planman

 

[planman8]

Kennyd,
The reason I don't think it will fit is that a local farm supply store said the cat 1 has a pin to pin size of 30 1/4". My 2305 drawbar pin to pin is just shy of 25" and I don't think the draft arms will spread wide enough. The flexpoint site doesn't give this info so I can only hope the supply store is correct. I contacted summitfab who makes flexpoint and was told that they weren't aware of a limited cat 1 like the 2305 has and didn't know if it would fit or not.
If they don't know, I sure don't. You would think they would know more about tractors. The pins for the cat 1 are the wrong size.
Thanks, planman

I ment to say the pins for the cat 0 are the wrong size.