Otto Syracuse
Gold Member
Uggh. Got a flat tire already. Small nail put me out of service for a couple of days but looking to get back in the saddle tomorrow night.
Flat tire
- Thread starter Otto Syracuse
- Start date
- Views: 1224
bigtiller
Super Member
- Joined
- Feb 1, 2006
- Messages
- 7,421
- Location
- central Iowa
- Tractor
- John Deere 2720 John Deere 3039R John Deere Z545R
couple of days? Ouch! My dealer has there own tire service truck so they are quite a bit faster.
Mechanos
Veteran Member
Do you not own a tire plug kit? Something like a small nail is about a 5 minute fix.
JD 4520
Platinum Member
Mechanos said:
Agree, this is a simple, effective, inexpensive fix that everyone should have in their tool kit.
Zebrafive
Super Member
I' ve had two in the front of the 2030 so far this year, both in the same day. 
I was driving back to the barn and notice it was steering funny, the right front was soft. Pulled it took it to the shop and repaired it. Next day I took it back and installed it and saw the left front was flat
AT LEAST IT WAS NOT A REAR!
I was driving back to the barn and notice it was steering funny, the right front was soft. Pulled it took it to the shop and repaired it. Next day I took it back and installed it and saw the left front was flat AT LEAST IT WAS NOT A REAR!
yelbike
Veteran Member
- Joined
- Nov 7, 2011
- Messages
- 1,639
- Location
- Near Winnipeg, Mb, Canada
- Tractor
- John Deere 2305, 2320,Z465
I use those cheap plug kits that you drive in from the outside of the tire. I cut the cord off close to the tread height than I burn the excess off( I don't think its need). I also use green slim, but I'm not sure if I like it anymore as its messy when actually change tires.
I don't do these fixes on vehicle or trailer tires as its unreliable, but for low speed tires I feel its fine.
I don't do these fixes on vehicle or trailer tires as its unreliable, but for low speed tires I feel its fine.
OP
Otto Syracuse
Gold Member
Mechanos said:
Nope, I do not. I should get one plus a lesson on how to do it. Luckily, my cousin has a large farm with a FT mechanic and he can fix almost anything for me. For him, it was a 5 minute fix. It only took me about 10 minutes to take it off and put it back on. No big deal really. Worked like a charm tonight, got a lot of mowing done.
