Finished cutting and drilling stainless posts

/ Finished cutting and drilling stainless posts #1  

allenr

Gold Member
Joined
Nov 28, 2006
Messages
399
Location
Barossa Valley, South Australia
Tractor
Duetz DX3.70, Fendt 305LSA,260S & 205P,Kubota B6100E & 3 x B5100E & RTV900, Caterpillar 428C
Took some photos today after completing cutting and drilling of Stainless 304 tube for trellis posts in vineyard.

As this was the third time of doing this in the last 6 years and I still have difficulty remembering how to set up the equipment, I decided to save some photos and share them with you as well.

MVC-769F.JPG

MVC-771F.JPG

MVC-775F.JPG

MVC-776F.JPG

MVC-787F.JPG

MVC-777F.JPG
 
/ Finished cutting and drilling stainless posts #2  
Never heard of using stainless steel for posts before. I guess it's worth the extra upfront expense to have something that won't rust out over the years?

Will you be installing them in the vineyard too?

Eddie
 
/ Finished cutting and drilling stainless posts #3  
Good ides cutting stainless with a chop saw. After several cuts the stainless made my bandsaw teeth vanish !
 
/ Finished cutting and drilling stainless posts
  • Thread Starter
#4  
Never heard of using stainless steel for posts before. I guess it's worth the extra upfront expense to have something that won't rust out over the years?

Will you be installing them in the vineyard too?

Eddie

About half are already in this year's planting of 1.5Ha (about 3.7 acres) of Albarino.

MVC-760F.JPG

MVC-761F.JPG

Those pictured in the stillages will be used in a year or two.

I hope they last forever, a guy who works at a local winery tells me that when used to store water, stainless tanks can develop hairline cracks.

I've had some in the ground since Oct 02 and to date there's no evidence of deterioration.
 
/ Finished cutting and drilling stainless posts
  • Thread Starter
#5  
Good ides cutting stainless with a chop saw. After several cuts the stainless made my bandsaw teeth vanish !

I had a bandsaw once - even on mild steel it had a penchant for sawing crooked. It sits unused somwhere in the shed.

Don't like the dust and smell from cut-off wheels but at least when they're worn out or occasionally damaged it's only a few dollar to replace the wheel.
 
/ Finished cutting and drilling stainless posts #6  
I had a bandsaw once - even on mild steel it had a penchant for sawing crooked. It sits unused somwhere in the shed.

Don't like the dust and smell from cut-off wheels but at least when they're worn out or occasionally damaged it's only a few dollar to replace the wheel.

My bandsaw does the exact same thing it is a Pain.
 

Marketplace Items

Warren Power Systems WCW84MH 8KW Portable Light Tower (A64194)
Warren Power...
Lonestar Panel 24ft. Free Standing Panel with 7ft. Gate (A65640)
Lonestar Panel...
2018 John Deere 5125R Tractor (A64047)
2018 John Deere...
2023 Kubota BX1880V-1 Sub - Compact Utility Tractor with 54-Inch Mower Deck (A63688)
2023 Kubota...
Gehl Mix-All Grinder Mixer (A66408)
Gehl Mix-All...
John Deere 1790 Planter (A66285)
John Deere 1790...
 
Top