Runner
Elite Member
- Joined
- May 12, 2007
- Messages
- 4,284
- Location
- Missouri
- Tractor
- 2024 Cub Cadet Ultima ZTXS5 54, 2007 John Deere 2520, 1989 John Deere 185, 1960 Panzer T70B
The only things I know to do are:
1. Try to cut before the grass gets too tall.
2. Go over the areas of clumping/windrows a second time to help spread out the clippings.
3. Double cut, i.e., only take 1/2 swath on each row.
4. Mow when grass is completely dry, especially if it is tall.
1. Try to cut before the grass gets too tall.
2. Go over the areas of clumping/windrows a second time to help spread out the clippings.
3. Double cut, i.e., only take 1/2 swath on each row.
4. Mow when grass is completely dry, especially if it is tall.
BruceSH
Bronze Member
- Joined
- Jun 20, 2021
- Messages
- 52
- Tractor
- JD 4010 compact tractor / CC Carryall 1500D / Agrotek MY50R Mini-Excavator
We have an older LandPride FDR1660 and if the grass is 10" or taller, and slightly wet, it will leave windrows. If we take it slower, and cut 2/3 width it does fine. When the grass is dry, no matter what it is a cutting sob and the lawn/fields look great. The mower is 15-20 years old. Still on the original spindles, solid rubber tires instead of the may go flat tubeless.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 32,543
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Cut often and half the width until clean cut.
you'll notice the difference on the deck height between finish & regular brush hogs. brush hogs have a deeper deck height, while finish are rather shallow... that difference is your limitation.
in addition, finish mowers are generally of lighter duty construction.
& keep knives sharp as well, regards
in addition, finish mowers are generally of lighter duty construction.
& keep knives sharp as well, regards
