Finally got the toolboxes mounted on the CK 27

[Mike Gibson]

I finally got the tractor back from the kids and had a chance to install a toolbox for the lifting & pulling gear. The box sits on two 1/4" X 2" flat bar brackets bent to cradle the loader arm and support the toolbox. I used two 1/4" bolts to hold the brackets to the loader arm.

Right after I bought the tractor I installed a larger toolbox behind the seat. The plastic item that came stock was a joke.

I added the "Easy Rider" rifle rack for varmints that seem to appear when you have no gun with you. With the shovel I first tried sticking it in the hollow of the bucket pipe. I couldn't keep it from rattling something awful so I just bungee it to the pipe now.

The chain box. I put it on this side so I could see the right side of the bucket as you lose a bit of visibility with the box.

The rear box.

The rifle rack.

The shovel in place.

Side view.

 

[jimmyj]

Looks handy. Thanks for posting.

 

[Grand_Pooba]

I've never seen a tool box on the loader arm....interesting.

 

[CowwFace]

Very nice!

Do they quick detach somehow, or are they bolted on?

Tractor on

 

[Mike Gibson]

There are two 1/4" bolts that keep the brackets from coming off the arm. The one in back is bolted like the stock toolbox was. I put polyurethane foam in the bottom of the toolbox on the arm so things don't rattle around and get beatup.