LindenBruce
Gold Member
Are your dealers the ONLY place to buy filters and other common maintenance items? JESUS!!!!! You would think there was an online source for all parts tractor. OMG!!! WHY does it have to be so hard!!! Rant over. B.
Filters... FILters.... FILTERS!!!!!
- Thread starter LindenBruce
- Start date
- Views: 3994
flyerdan
Veteran Member
There should be lots of online cross reference guides; Baldwin Filters comes to mind as a great source. If all else fails, I have printed books that have all applications for drive belts, bearings and seals, as well as a bunch of filter and spark plug books from different brands.
3gunr
Veteran Member
- Joined
- Apr 17, 2018
- Messages
- 1,172
- Location
- wentzville mo
- Tractor
- mahindra 2538 mahindra 2810 cub cadet 7260 massey 255
My last ones i got from napa. Also oreillys carries some of them or can be cross referenced.
OP
LindenBruce
Gold Member
I tried a cross for Napa and O'Reileys and neither shows a cross for the engine or hydraulic oil filters using the factory part numbers. AND, by application O'Reileys doesn't show anything at all and Napa shows SOME stuff but nothing for direct application. Napa has a reference for a 4520C, but not for a 4520R. Frustrating. B.
flyerdan
Veteran Member
To get something from the local auto parts store, you'll probably have to go the back way, by finding filters on an industrial supplier site like Baldwin or Wix, then finding the common brand equivalent of them that the store would carry.
Neither site would deep link to the specific page, but they do have the relevant filters.
Neither site would deep link to the specific page, but they do have the relevant filters.
Granthol
Silver Member
The 10 series should be the same as the 20, the manual is the same.
I have the Wix #s in this thread and Astral put the factory #s in. I did not use the Wix hydraulic, but do use the others.
https://www.tractorbynet.com/forums/century-branson/394169-branson-2910i-info-needed.html?highlight=
I have the Wix #s in this thread and Astral put the factory #s in. I did not use the Wix hydraulic, but do use the others.
https://www.tractorbynet.com/forums/century-branson/394169-branson-2910i-info-needed.html?highlight=
sikmusicfreak8
Silver Member
Do NOT cross your hydraulic filter with a Napa. Just did that, and its 100% a restriction, made my pump scream, it was terrible. I just changed it again for the Baldwin cross, and it is fine. I couldnt get my hands on an OEM at the time, but thats the best option.
As far as fuel or engine oil filter, you can cross to anything you like.
As far as fuel or engine oil filter, you can cross to anything you like.
OP
LindenBruce
Gold Member
Thanks for the info guys. I ordered the two filters from Dave's. When I get them I will try and compare them to the other brands. It seems like the hydro filter is the picky one. B.
Frankenkubota
Veteran Member
- Joined
- Jun 11, 2020
- Messages
- 2,386
- Location
- Carthage NC...Deep in the woods
- Tractor
- Kubota MX 5800, SkidPro 4 in 1, Ratchet rake, SkidPro pallet forks
Just bought oil and filter for 200 hour on mx. Dealer told me because of warranty issues, you must use oem.
That sounds like lawyer talk to me but, i bought 2 gallons of kubota motor oil and their filter, $55.
I did see some guy on u tube cut open a Fram and kubota oil filter and there was a significant difference. Question is, does it make any difference?
That sounds like lawyer talk to me but, i bought 2 gallons of kubota motor oil and their filter, $55.
I did see some guy on u tube cut open a Fram and kubota oil filter and there was a significant difference. Question is, does it make any difference?
