FEL pins- source?

   / FEL pins- source? #1  

OldTrix

Bronze Member
Joined
Apr 10, 2021
Messages
94
Tractor
none
I discovered some of the slop in my FEL today, seems the pins have a bow to them. The PO of this thing must have been a real genius.

Anyhoo, can I just trot down to Tractor Supply and match up a new set? Or, are these specially hardened/sized factory parts? They don't look special at all, not even hardened.

FEL is on a Mahindra 2665
 
   / FEL pins- source? #2  
I discovered some of the slop in my FEL today, seems the pins have a bow to them. The PO of this thing must have been a real genius.

Anyhoo, can I just trot down to Tractor Supply and match up a new set? Or, are these specially hardened/sized factory parts? They don't look special at all, not even hardened.

FEL is on a Mahindra 2665
would say they probably brand specific. My loader is a Rhino and measured o.d. of pins. looks like they are Rhino specific. Not sure you can find them at TSC or Rural King
 
   / FEL pins- source? #3  
Bent pins are prob just the start of the problem. Bent pins usualy means you have oval holes.
 
   / FEL pins- source?
  • Thread Starter
#4  
Yeah, I figured that as well. Weld and rebore?
 

Tractor & Equipment Auctions

CASE IH 2555 4R COTTON PICKER (A51247)
CASE IH 2555 4R...
2004 IC Corporation 3000IC School Bus (A51692)
2004 IC...
UNUSED HURRICANE G350 MINI CONCRETE MIXER (A51248)
UNUSED HURRICANE...
2011 Mack CHU613 T/A Wet Kit Day Cab Truck Tractor (A51692)
2011 Mack CHU613...
Electric Concrete Mixer (A51573)
Electric Concrete...
(APPROX 80) 2" X 3" X 16 3/4" ANGLE IRON (A51247)
(APPROX 80) 2" X...
 
Top