3-Point Hitch Farmtrac 360DTC 3-POINT HITCH OPERATION

   / Farmtrac 360DTC 3-POINT HITCH OPERATION #1  

GeorgeG

New member
Joined
Apr 29, 2011
Messages
1
Tractor
FarmTrac 360DTC
I have a Farmtrac 360DTC with backhoe and loader. I removed the backhoe to use the 3-point hitch. The lift arms are up and I cannot get them to move. I don't have an operator's manual. Can someone explain how to work the 3-point hitch, or any ideas why they won't go down??

Also, does anyone know what the two hydraulic control valves are for?

Thanks!
 
   / Farmtrac 360DTC 3-POINT HITCH OPERATION #2  
I have a Farmtrac 360DTC with backhoe and loader. I removed the backhoe to use the 3-point hitch. The lift arms are up and I cannot get them to move. I don't have an operator's manual. Can someone explain how to work the 3-point hitch, or any ideas why they won't go down??

Also, does anyone know what the two hydraulic control valves are for?

Thanks!

Below the seat above the transmission hump there should be two turn knobs. One of those knobs is a lock valve that locks and controls the rate of drop on the three point. It is probably in the lock position. The other knob turns one of the auxilary corntrol valves into a single acting rather than dual acting.

The two hydraulic control valves are for auxilarry equipment like top and tilt cylinders. They are operated by the two levers on the right side above the diff lock.
 

Tractor & Equipment Auctions

GARDNER DENVER 480 VOLT AIR COMPRESSOR (A50854)
GARDNER DENVER 480...
Ford Super Duty Pickup Truck Bed (A49461)
Ford Super Duty...
2017 POLARIS RANGER 570 4X4 PROSTAR UTV (A51406)
2017 POLARIS...
2019 CATERPILLAR 308 CR EXCAVATOR (A50458)
2019 CATERPILLAR...
2016 John Deere 35G Mini Excavator (A49461)
2016 John Deere...
2020 FREIGHTLINER 26FT BOX TRUCK (A51219)
2020 FREIGHTLINER...
 
Top