North Georgia
New member
Bought another Farmall Cub last week and the guy was running a 12 volt battery but the tractor still had the six volt system. I know this will not run the lights but will it cause any other damage? Thanks for your help...
Farmall Cub
- Thread starter North Georgia
- Start date
- Views: 2149
-
- Tags
- farmall cub
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
if he did not change the coil or add a ressitor, it will eventually ruin the coil and the points.. that is.. unless this is a magneteo ignition.
what year cub? in 66 they went to a 12v system..
soundguy
what year cub? in 66 they went to a 12v system..
soundguy
OP
North Georgia
New member
Thanks for the input..The cub is a magneto system
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
since it has a magneto system.. then you just need to get the charge system setup. either go back to 6v and use the stock genny on a 6c bat, and stock style lmaps.. or use the 12v battery, and get the genny rebuilt as 12v.. shouldn't be hard since a 12v version of that genny became available in 66.. should be easy to rebuild as 12.. then swap in new lamps. Starter won't care...but spins faster on 12v.. just don't grind on it forever or it will throw solder..
soundguy
soundguy