Euro/Global to Skid steer/SSQA adapter

[Hay Dude]

Want to buy an adapter to go from global to SSQA. Local dealer wants $1,000 for 4000lbs capacity.
Found this one on Ebay for 1/3rd the price with 3500lbs capacity. I’m sure its inferior Chinese, but $700 less is a LOT less. maybe take a chance since I wont use much? Only need for snow plow.

4000lbs Quick Attach Skid Steer âConversion Adapter Plate Fit Global John Deere | eBay

3500 lbs Quick Tach Conversion Adapter Latch Fit Global John Deere To Skid Steer. Simply remove the quick-release bucket from your front-end loader and quickly connect this converter to start using your skid steer tool.

www.ebay.com

Says “John Deere/global”

I thought these 2 were different. I though John Deere has a pin on style that is different from Global?
It looks like global, but sometimes pictures are not of the exact piece.

 

[ptsg]

Found this discussion about the Global vs JD and someone said it's not the same. The spacing on the lower tabs is different.

Euro-Global vs John Deer Quick Attach Differences

I have a tractor that has a Euro-Global quick attach loader (actually I think they are better than the skid steer attaches). Can someone explain the difference between the Euro-Global and the John Deere Global systems? I have never messed with John Deeres. Do they have different loader systems...

www.cattletoday.com

Maybe if you contact the seller, they can provide you some measurements? Although, for that money, I think I would still get it, even if I had to re-weld the bottom tabs.

 

[Hay Dude]

Shipped to me for $334 is so cheap it’s hard to resist, versus driving 100 miles and paying $1,000.
Sometimes THAT much savings is worth a shot, but still confused about fitting. From picture it looks same. Sent question to seller.

 

[ptsg]

Looks indeed very close and it's common for the Euro quick attach to have quite a bit of wiggle room.

 

[Xfaxman]

From Image Searches, and previous threads on here, this is John Deere:

This is Euro/Global:

 

[ROUSTABOUT]

We have Kubota SSQA on our Ford's, because I worked at Kubota and brought home the distorted ones. Make it fit, I did. In fact, made it to where it'd fit three tractors. I would never do something like that, I did too, yep I did.

 

[slckeys]

The eBay item looks more like global to SSQA simply going off the bottom pins that JD seems to have for their setup in my opinion...

 

[zzvyb6]

Want to buy an adapter to go from global to SSQA. Local dealer wants $1,000 for 4000lbs capacity.
Found this one on Ebay for 1/3rd the price with 3500lbs capacity. I’m sure its inferior Chinese, but $700 less is a LOT less. maybe take a chance since I wont use much? Only need for snow plow.

4000lbs Quick Attach Skid Steer âConversion Adapter Plate Fit Global John Deere | eBay

3500 lbs Quick Tach Conversion Adapter Latch Fit Global John Deere To Skid Steer. Simply remove the quick-release bucket from your front-end loader and quickly connect this converter to start using your skid steer tool.

www.ebay.com

Says “John Deere/global”

I thought these 2 were different. I though John Deere has a pin on style that is different from Global?
It looks like global, but sometimes pictures are not of the exact piece.

John Deere has 3 types of QA systems: Global, SSQA, and Hook & Pin. They also have adapters for Hook & Pin to SSQA. There may also be a Global to the others. The ebay Item you showed is Global to SSQA. I am reminded though of this caveat: These adapters tend to be quite heavy and take away a considerable amount of loader lift capacity.

 

[Rustyiron]

Shipped to me for $334 is so cheap it’s hard to resist, versus driving 100 miles and paying $1,000.
Sometimes THAT much savings is worth a shot, but still confused about fitting. From picture it looks same. Sent question to seller.

I interpret this as "JD with the global" to SS. Doesn't JD offer the global in Europe?
That eBay picture sure looks it's global on the tractor side and not anything like the JD (US) that I've had or seen.

 

[ptsg]

Technically, the proper name is Euro quick attach but for some reason, JD like to call it Global and create a whole lot of confusion.