oldnfat2
New member
Have 16 hp briggs,28 gph pump. whats going on used to work fine.
homemade set up. what the **** went wrong?
homemade set up. what the **** went wrong?
engine dies when ram moves forward on logsplitter
- Thread starter oldnfat2
- Start date
- Views: 1230
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 19,518
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
:welcome:
murphy1244
Super Star Member
- Joined
- Nov 25, 2011
- Messages
- 19,518
- Location
- Ohio
- Tractor
- Kubota 1120 RTV Kioti DK-40, MF-135, Ventrac 4500Y
Sounds like the govner not working right
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,973
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
Install a hyd pressure gage in a tee in the IN port of the splitter valve and you will probably hae your answer.
Somewhere you are blocking the hyd fluid and the engine will probably stall and quit if the relief valve can not handle the volume of fluid.
Maybe the relief is not working
Could be a malfunction QD, or valve lever in wrong position.
If it only does this with the log splitter , it is probably the QD's.
Somewhere you are blocking the hyd fluid and the engine will probably stall and quit if the relief valve can not handle the volume of fluid.
Maybe the relief is not working
Could be a malfunction QD, or valve lever in wrong position.
If it only does this with the log splitter , it is probably the QD's.
