dford
Member
I would like to know if any body has coverted a Ford 3000 gas 3cyl to electric tach?
Hooked_on_HP
Veteran Member
If you are talking about a tach like you use in a car it won't work. The car tach only has selection for 4, 6, or 8 cylinders.
Bill
Bill
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
You;d have to get a cheap small engine inductive pickup tach and hook it to a plug wire.. they are about 50 bucks minimum.. and run on a watch battery.. kinda cheesy IMHO.
what's wrong with your cluster / tach? you can get new clusters or cables?
soundguy
what's wrong with your cluster / tach? you can get new clusters or cables?
soundguy
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
more power.. yes...
simplified wireing? no... old harness is still present.. removing it in pieces will be work.
downside is the tach issue.
you could of course get a 10dn alternator with external reg, and a tach drive for a emchanical tach... etc..
more $$ though..
soundguy
simplified wireing? no... old harness is still present.. removing it in pieces will be work.
downside is the tach issue.
you could of course get a 10dn alternator with external reg, and a tach drive for a emchanical tach... etc..
more $$ though..
soundguy
