(Dumb) filter question

/ (Dumb) filter question #1  

Will

Gold Member
Joined
Apr 11, 2000
Messages
251
Location
Athens, Georgia
Tractor
B2410HSD
How many hydraulic filters are there on a Kubota B2410HSD? I was expecting 1, like on my B2100, but when I took a look at the other side of the tractor, there seems to be another one. Rereading the manual seems to confirm that that there is a filter on both sides.Just HYPOTHETICALLY suppose someone was dumb enough to replace only one filter and then fill the hyrdraulics with about 3 gallons of expensive Super UDT fluid. Would there be any problem draining the fluid into a clean container, replacing the other filter, and putting the fluid back in afterwards?Thanks,Will
 
/ (Dumb) filter question #2  
Will,

I just did that on my 2910. Got a clean 5 gal bucket ran tractor on one side ramp, place bucket remove filter and catch the good stuff. Had a screened funnel to put back in after correct filter was inplace.

I've only put 7 hrs since but everything seems to be fine.

Good luck.
 

Marketplace Items

1981 LINK BELT HSP 8028 (A58214)
1981 LINK BELT HSP...
2002 Haulotte 44ft Man Lift (A61166)
2002 Haulotte 44ft...
17398SFL (A61569)
17398SFL (A61569)
2-Row Peanut Inverter (Chain Drive, PTO, 3-Point Hitch) (A61307)
2-Row Peanut...
2017 Case CX145D (A60462)
2017 Case CX145D...
2006 CHEVROLET SILVERADO 3500 FLATBED (A58214)
2006 CHEVROLET...
 
Top