(Dumb) filter question

   / (Dumb) filter question #1  

Will

Gold Member
Joined
Apr 11, 2000
Messages
251
Location
Athens, Georgia
Tractor
B2410HSD
How many hydraulic filters are there on a Kubota B2410HSD? I was expecting 1, like on my B2100, but when I took a look at the other side of the tractor, there seems to be another one. Rereading the manual seems to confirm that that there is a filter on both sides.Just HYPOTHETICALLY suppose someone was dumb enough to replace only one filter and then fill the hyrdraulics with about 3 gallons of expensive Super UDT fluid. Would there be any problem draining the fluid into a clean container, replacing the other filter, and putting the fluid back in afterwards?Thanks,Will
 
   / (Dumb) filter question #2  
Will,

I just did that on my 2910. Got a clean 5 gal bucket ran tractor on one side ramp, place bucket remove filter and catch the good stuff. Had a screened funnel to put back in after correct filter was inplace.

I've only put 7 hrs since but everything seems to be fine.

Good luck.
 

Tractor & Equipment Auctions

2013 Ford Transit Connect Van (A52377)
2013 Ford Transit...
2025 K0720 UNUSED Metal Farm Driveway Gate Set (A53117)
2025 K0720 UNUSED...
Front Axle and Engine (A51692)
Front Axle and...
2003 International 7400 T/A Heil 12 CuYd Dump Truck (A51692)
2003 International...
2002 Almac 4,200 Gallon Fuel Tank Truck Body (A51692)
2002 Almac 4,200...
2011 Ram 1500 4x4 Crew Cab Pickup Truck (A53422)
2011 Ram 1500 4x4...
 
Top