(Dumb) filter question

   / (Dumb) filter question #1  

Will

Gold Member
Joined
Apr 11, 2000
Messages
251
Location
Athens, Georgia
Tractor
B2410HSD
How many hydraulic filters are there on a Kubota B2410HSD? I was expecting 1, like on my B2100, but when I took a look at the other side of the tractor, there seems to be another one. Rereading the manual seems to confirm that that there is a filter on both sides.Just HYPOTHETICALLY suppose someone was dumb enough to replace only one filter and then fill the hyrdraulics with about 3 gallons of expensive Super UDT fluid. Would there be any problem draining the fluid into a clean container, replacing the other filter, and putting the fluid back in afterwards?Thanks,Will
 
   / (Dumb) filter question #2  
Will,

I just did that on my 2910. Got a clean 5 gal bucket ran tractor on one side ramp, place bucket remove filter and catch the good stuff. Had a screened funnel to put back in after correct filter was inplace.

I've only put 7 hrs since but everything seems to be fine.

Good luck.
 

Tractor & Equipment Auctions

2013 BMW 328i Sedan (A55853)
2013 BMW 328i...
2016 Chevrolet Sonic LS Hatchback (A56859)
2016 Chevrolet...
2000 HAULMARK K716BT-WT 7' X 16' CARGO TRAILER (A52708)
2000 HAULMARK...
VOLVO EC460CL EXCAVATOR (A58214)
VOLVO EC460CL...
JOHN BLUE 1000 GALLON NURSE TANK (A52708)
JOHN BLUE 1000...
LOT: (5) Bolt Cutters (A59076)
LOT: (5) Bolt...
 
Top