drag-em

/ drag-em #1  

heehaw

Veteran Member
Joined
Sep 15, 2000
Messages
2,076
Location
russellville, arkansas
Tractor
Kubota M4900, B7510 and RTV
i took a cow and calf to the sale barn yesterday,
she was one of 2 i have that has horns, and she
had a tendency to use or at least threaten to use the horns...
i finally had to tie a rope around her horns and run it thru the
stock trailer and then to my ole JD tractor an pull
her into the trailer. she got to the edge of the
trailer and just laid down.the rope broke twice, and
she still wouldn't get up, i am glad to see her
gone. it took me over 2.5 hours to get her
loaded...but i learned a lesson..dragging works real
well..and after seeing a bull hanging by the horns under a helicopter on the boob tube last night, i don't feel so bad about dragging the cow. cattle must be a lot higher priced wherever they were doing that round-up using a helocopter.
heehaw
 
/ drag-em #2  
Isn't that why they invented the cattle prod.
 
/ drag-em
  • Thread Starter
#3  
yep, a cattle prod is a good tool..i don't have one right now, but will get one.....BUT, i have seen how a cow reacts when hit with that prod....so i'm not 100% sure i would have used it to load this cow...don't want one trying to clear the 5ft cattle panels or going thru the side of the barn.
heehaw
 

Marketplace Items

2024 JOHN DEERE TURF GATOR TX 4X2 UTV (A63276)
2024 JOHN DEERE...
IRANCH Tire Changing Machine (A64194)
IRANCH Tire...
T/A CO2 Tanker Trailer (A64194)
T/A CO2 Tanker...
2005 Anderson 24ft T/A Dovetail Tag Trailer (A64556)
2005 Anderson 24ft...
2007 Chevrolet Silverado 3500 4x4 Service Truck (A64556)
2007 Chevrolet...
2022 JCB 509-42F TELESCOPIC FORKLIFT (A65053)
2022 JCB 509-42F...
 
Top