VTHartford
New member
- Joined
- Apr 14, 2006
- Messages
- 19
What is draft control as it relates to a tractor?
Bill
Bill
Draft Control?
- Thread starter VTHartford
- Start date
- Views: 944
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,644
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
It varies by tractor brand, tractor size, and tractor age.
Would help to know which tractor you want information about, or which task you want to perform that you think draft control is the answer.
A search on 'draft control' should give you a lot of good information and interesting reading.
Would help to know which tractor you want information about, or which task you want to perform that you think draft control is the answer.
A search on 'draft control' should give you a lot of good information and interesting reading.
Farmwithjunk
Super Member
Harry Ferguson "invented" the 3 point hitch. Part of the "value" in his invention was the ability of a smaller, lighter, lower horsepower tractor to do the work of something bigger.
Back then, almost every tractor spent a fair amount of time with a plow mounted on it. The load (or resistance) a plow exerts on a tractor is called "draft". It's effected by the depth at which the plow is operated. Draft control is the tractors ability to sense increasing or DECREASING draft loads as the tractor moves along. It moves the plow up or down (ever-so-slight sometimes) to regulate that draft load. As the plow is lifted slightly in tough going, it pulls down on the rear wheels, increasing traction through the tough plowing. After the tractor passes through the tough spot, and the draft load lessens, the plow will return to it's pre-set depth.
Draft control is of very limited use in anything but tillage. (i.e. moldboard plow, chisel plow, field cultivator, ect....)
Back then, almost every tractor spent a fair amount of time with a plow mounted on it. The load (or resistance) a plow exerts on a tractor is called "draft". It's effected by the depth at which the plow is operated. Draft control is the tractors ability to sense increasing or DECREASING draft loads as the tractor moves along. It moves the plow up or down (ever-so-slight sometimes) to regulate that draft load. As the plow is lifted slightly in tough going, it pulls down on the rear wheels, increasing traction through the tough plowing. After the tractor passes through the tough spot, and the draft load lessens, the plow will return to it's pre-set depth.
Draft control is of very limited use in anything but tillage. (i.e. moldboard plow, chisel plow, field cultivator, ect....)
