Draft - 4110

   / Draft - 4110 #1  

BobF

Bronze Member
Joined
Oct 11, 2006
Messages
56
I've never used the draft control on my 4110 or any other tractor.

When I get ready to plow, I need to know exactly how to use this thing. So, the plow is hooked up and the pin on the top link connector has been moved to the slotted position.

Now what?

Do I still raise/lower with the pos lever, controlling draft response with the draft lever, or is this wrong?

BTW, I'd like to talk to the engineer that designed the pin system for the top link - I'll never understand why these things are designed to require sledge hammers for setup/operation.

A step-by-step on draft mode with a plow would be great.
 
   / Draft - 4110 #2  
Start plowing with the position and draft in the down position. The plow will pull down into the ground, then raise the draft control until the desired depth is reached and leave the draft lever at that position. Use the position control to raise and lower the plow at the end of the field. If you need additional adjustment on the plowing depth use the draft control for that. I hope I explained that well enough.
 
   / Draft - 4110
  • Thread Starter
#3  
Thanks - sounds simple enough and pretty much what I was thinking.
 

Tractor & Equipment Auctions

2009 PETERBILT 388 TANDEM AXLE DAY CAB (A51219)
2009 PETERBILT 388...
1264 (A50490)
1264 (A50490)
2018 Vermeer D23X30 S3 Navigator Directional Drilling Machine (A49461)
2018 Vermeer...
KLEEMAN MS192 MOBILE SCREEN (A51242)
KLEEMAN MS192...
2014 GOOSENECK DRIVER SIMULATOR TRAILER (A50854)
2014 GOOSENECK...
MAXUM 1000 TRIPLEX PUMP POWERED BY 3412 CATERPILLAR ENGINE (A50854)
MAXUM 1000 TRIPLEX...
 
Top