Doosan excavator sl75v

[Peter 315]

You read the article?

 

[liberty2701]

I will measure the time and let you know tomorrow. Reading it now.

 

[liberty2701]

That is a great article. I obtained cycle time specs of 2.2 seconds for dump and 3.2 for curl. Both +/- .3. I will verify the times and dig deeper using the article.

 

[Peter 315]

Thats part 2 you can get part 1 off the site

 

[liberty2701]

I think it is ok. I timed both and the close is 2 seconds and the open is 3.6sec. Both within spec. The open is on the faster side of the spec that is probably why it appeared so much faster. The close is on the slower side.