DK55C PTO Trouble

[billr3408]

My PTO stopped while I was using it. There is no light on switch on roll bar or instament panel. I've checked the 10amp fuse and PTO relay and both are OK. What is my next option?
Thanks,
Billr3408

 

[kenstrac]

Remove the fuse and use a tester to check it sometimes they blow internally and you cant see it.

 

[IslandTractor]

Were you operating in brush when it happened? The PTO on the newer models are electrically controlled and it is possible to either damage or hopefully just unplug one of the connectors under the operator station. I did that (unplug) with my DK40se and lost the 4wd function until I sorted it out and plugged it back in.