DIY Snowcat build

   / DIY Snowcat build
  • Thread Starter
#11  
Super sketchy trial run.
IMG_3367.jpeg

Found some galvanized steel at the dump and used it to tub the frame.
IMG_3400.jpeg

Smooth bottom to slide over snow better.
IMG_3399.jpeg


IMG_3437.jpeg
 
   / DIY Snowcat build
  • Thread Starter
#12  
About four months after starting it was going around my yard. Everything worked. Sprockets were initially very rudimentary and track tension was too loose. Had a new belt on that was squealing a bit.

Home Built Snowcat test
 
   / DIY Snowcat build
  • Thread Starter
#13  
Walls are thin fiberglass reinforced plastic. Cheap, light.
IMG_3481.jpeg


Early trial run. Still had long exhaust from snowmobile. Cooling fans found to be unnecessary.
IMG_3811.jpeg


Rebuilt a new chain drive system with better bearings.
IMG_3822.jpeg
 
   / DIY Snowcat build
  • Thread Starter
#14  
Sprocket replaces ring gear in this scenario.

Chain drive differential

First version that changed this winter.

 
   / DIY Snowcat build
  • Thread Starter
#15  
Neighborhood testing.
IMG_3989.jpeg


Prior to gear reduction.

1.25” grousers have their limitations but are a lot easier to turn.#snowcat #trackedvehicle
 
   / DIY Snowcat build
  • Thread Starter
#16  
After gear reduction. Busting drifts in the spring about 8 miles back in the mountains.

Helping a friend gain access to his remote mountain cabin.
Last day of the year. Tearing it down to the nub to recoat the frame, etc etc.
 
   / DIY Snowcat build
  • Thread Starter
#17  
This summer I’m cleaning up the wiring, fabrication of new muffler, making final output shaft 2” diameter hardened steel vs 1” el-cheapo that I snapped. Working on the very spartan interior. Rebuilding new polyurethane sprockets.

Will also fabricate new six way blade with tilt function to better level ski trails. Oh, and fabricating a new drag for grooming.

Plenty to do
 
   / DIY Snowcat build #18  
Wow, looks like a lot of work, must be a labor of love. Some questions,

Is the cab heated ?
Where did you get that differential from?

Richard
 
   / DIY Snowcat build #19  
Ok, you just got another subscriber for your YouTube channel!
Fantastic stuff👍
And I was right in my first post, your too modest and my hat's off to you and your build!
 
   / DIY Snowcat build
  • Thread Starter
#20  
Wow, looks like a lot of work, must be a labor of love. Some questions,

Is the cab heated ?
Where did you get that differential from?

Richard
Diesel heater in cab. Diff is from 1 ton Chevy.
 

Tractor & Equipment Auctions

2017 FORD F 550 XL SERVICE BODY (A50505)
2017 FORD F 550 XL...
2019 Ford Transit 150 Cargo Van (A48081)
2019 Ford Transit...
2022 Club Car Tempo Golf Cart (A48082)
2022 Club Car...
Tractor Rims with spacer and Tires (A50860)
Tractor Rims with...
2012 Ford F-350 Omaha Crane Service Truck (A48081)
2012 Ford F-350...
2025 Swict 84in Bucket Skid Steer Attachment (A50322)
2025 Swict 84in...
 
Top