Gizmo36
Platinum Member
A friend of mine has a Kingkutter 18 x 20 disc harrow he wants to trade me for my 16 x 16 disc harrow . will a 2210 Yanmar pull the 18 x 20 . dose any one have a set that big for there 2210.
Disc 18 x 20
- Thread starter Gizmo36
- Start date
- Views: 2235
1danny
Platinum Member
Gizmo36 said:
I think the 18x20 is too big. The 16x16 KK angle iron disc is 460#, the KK 18x20 angle iron disc is 560# and the KK 18x20 box disc is 790#.
Danny
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 15,016
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
Danny, what's the engine in a 2210? Is it just a 2TR20A-X with the injector turned up, or larger displacement?
1danny
Platinum Member
California said:
The YM2210 has a 2T90 engine, most engine parts will interchange. The OEM piston on the YM2210 has 1 piston ring below the piston pin and the YM2000 has all the rings above the piston pin.
Danny
OP
Gizmo36
Platinum Member
I am going to see if I can pull it. will let you know. Danny is the 2210 the only one that has a ring below the piston pin. and will that piston fit in any of the three cylinder.
1danny
Platinum Member
Gizmo36 said:
OP
Gizmo36
Platinum Member
You were right ,I could not pull them .
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 15,016
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
Similar experience here.
My tractor apparently has the same size engine, and it came with a 5 ft 9 inch "Leinbach 97" disc which has sixteen 18" pans. The previous owner said he was told when he bought the tractor from its long-time owner that they were used together for years in a flood-irrigated flat walnut orchard, but he couldn't pull it in a dry pasture.
Everything around me is on a slope and I can't pull it uphill above a crawl, after I put enough weight on it to tear up grass.
Here's an old thread with more discussion and a photo of this Leinbach 97 in use.
http://www.tractorbynet.com/forums/yanmar/66394-what-size-disc-do-i.html#post739917
My tractor apparently has the same size engine, and it came with a 5 ft 9 inch "Leinbach 97" disc which has sixteen 18" pans. The previous owner said he was told when he bought the tractor from its long-time owner that they were used together for years in a flood-irrigated flat walnut orchard, but he couldn't pull it in a dry pasture.
Everything around me is on a slope and I can't pull it uphill above a crawl, after I put enough weight on it to tear up grass.
Here's an old thread with more discussion and a photo of this Leinbach 97 in use.
http://www.tractorbynet.com/forums/yanmar/66394-what-size-disc-do-i.html#post739917
OP
Gizmo36
Platinum Member
The 16 X 16 pull so easy I thought I could pull it. but it did not work.hard ground it was ok . but in soft dirt it would not move it.